环氧树脂，FM® 400NA对比环氧树脂，Ad-Tech Epoxy EL-324-SC物性表,价格行情_搜料

牌号信息	FM® 400NA 物性表环氧树脂 & 美国氰特指导价格：暂无塑料库存：缺货	Ad-Tech Epoxy EL-324-SC 物性表环氧树脂 & 美国AD-TECH 指导价格：暂无塑料库存：缺货
牌号简介	FM® 400NA胶膜是FM 400的非石棉版本，旨在提供与FM 400胶相同的性能。它配备了轻质尼龙载体，设计用于将金属与金属粘合在一起，以及需要长时间暴露在420°F（216°C）下的夹层复合结构。BR400是一种改性环氧防腐底漆，用于铝结构时具有优异的耐腐蚀性。FM® 400NA粘合膜也将与BR 127底漆粘合，结果正常。如果不需要耐腐蚀性，可使用FM® 400NA粘合膜而不需要底漆。FM® 400NA胶膜可在各种升温速率、温度和压力下固化。建议的固化循环为3至8.5°F/min（1.6至4.7°C/min）的升温速率，60分钟保持在350±10°F（177±5.6°C）和45±10 psi（0.31±0.07 MPa）的压力下。建议应用：蜂窝夹层结构金属与金属的粘合 FM® 400NA adhesive film is the non-asbestos version of FM 400 and is designed to provide similar performance to that of FM 400 adhesive across the board. It is supplied with a lightweight nylon carrier and is designed for bonding metal-to-metal and sandwich composite structures requiring long time exposures to 420°F (216°C). BR® 400 is a modified epoxy corrosion inhibiting primer and provides excellent corrosive resistance when used on aluminum structures. FM 400NA adhesive film will also bond to BR® 127 primer with normal results. Where corrosion resistance is not required, FM 400NA adhesive film can be used without primer. FM 400NA adhesive film can be cured over a wide range of heat-up rates, temperatures and pressures. The recommended cure cycle is a 3 to 8.5°F/min (1.6 to 4.7°C/min) heat-up rate with a 60 minute hold at 350 ± 10°F (177 ± 5.6°C) and 45 ± 10 psi (0.31 ± 0.07 MPa) pressure. Suggested Appliations: Honeycomb sandwich construction Metal-to-metal bonding	Ad-Tech Epoxy EL-324-SC是一种环氧; 环氧树脂产品,。它可以通过层压法进行加工,在北美洲有供货。典型应用领域为:涂覆应用。 Ad-Tech Epoxy EL-324-SC is an Epoxy; Epoxide (Epoxy) product. It can be processed by laminating and is available in North America. Typical application: Coating Applications.

产品描述
厂家：	美国氰特 Cytec Industries	美国AD-TECH
类别：	环氧树脂环氧树脂	环氧树脂环氧树脂
填料：
用途：	粘合剂,构件	层压板
性能特点：	耐老化,耐腐蚀,耐高温,粘结性好 Good heat aging resistance,Corrosion Resistant,High Heat Resistance,Good bond
加工条件：		层压法