PCTG，Eastalite™ Copolyester MP007F对比 PCTG，Eastar™ MN052物性表,价格行情_搜料

牌号信息	Eastalite™ Copolyester MP007F 物性表 PCTG & 美国伊士曼指导价格：暂无塑料库存：缺货	Eastar™ MN052 物性表 PCTG & 美国伊士曼指导价格：暂无塑料库存：缺货
牌号简介	具有无孔ESTAR共聚酯6763皮的Ethalalt发泡共聚酯MP07F是一种透明的无定形材料，具有封闭的泡沫结构，可用于医疗包装。它通常是白色/珠光的外观，但也可以使用伊士曼树脂和浓缩物着色。应用/使用医疗包医疗安装卡不透明医疗和药物包装热成型包装工作在工艺托盘中关键属性可与其他共聚酯回收用于非医疗消费后市场，环氧乙烷（ETO）、γ或电子束辐照或气体等离子体ST后的颜色和功能稳定性。符合ISO 11607适用章节的灭菌，包括微生物屏障，符合ISO 10993医疗器械生物相容性要求，缩短热成型周期和能源使用，设计更灵活，包括耐久性、易印刷、深咬边、长寿命铰链、增强的产品保护G。比其他材料（包括乳胶、丁二烯、双酚S（BPA）和双酚S（BPS）、邻苯二甲酸酯、PVC、卤素等）更易受脆裂影响的HIPS更易发生撕裂和弯曲强度，更轻的阻光和不透明度，更轻的无苯乙烯替代品符合环保的采购指南，零件的最小生成量。修剪或切割时的绞刀和天使毛发最小应力美白为共聚酯使用的普通盖面材料提供了良好的热密封性能。COF和阻断力控制不需要进行表面改性。可持续LCA-每个托盘的全球变暖潜力为0.33千克二氧化碳当量/托盘，使用MP007F隔热材料制成。影响 Eastalite™ Foamed Copolyester MP007F with nonporous Eastar™ Copolyester 6763 skins is an opaque, amorphous material with a closed foam structure useful for medical packaging. It is normally white/pearlescent in appearance but may also be colored using Eastman resins and concentrates. Application/Uses Medical kits Medical mounting cards Opaque medical and pharmaceutical packaging Thermoformed packaging Work-in-process trays Key Attributes Can be recycled with other copolyesters for use in nonmedical post-consumer markets Color and functional stability following ethylene oxide (EtO), gamma or e-beam irradiation, or gas plasma sterilization Compliant with applicable sections of ISO 11607 including microbial barrier Complies with select ISO 10993 requirements for biocompatibility of medical devices Decreased thermoforming cycle time and energy use Greater design flexibility including durability, easy printing, deep undercuts, long-life hinges, enhanced product protection Greater tear and flex strength than more brittle and crack susceptible HIPS Light blocking and opacity Light weight Styrene-free alternative Made without other materials of concern, including Latex, Butadiene, BPA and bisphenol S (BPS), ortho-phthalates, PVC, halogens Meets environmentally preferable purchasing guidelines Minimal generation of particulates and angel hair when trimmed or cut Minimal stress whitening Provides good heat seal performance to common lidding materials used with copolyesters Surface modifications are not necessary for COF and blocking force control Sustainable LCA -The global warming potential per tray is 0.33 kg CO2-eq/tray made using MP007F Temperature insulating effect	Eastar聚酯MN052在γ和ETO灭菌后进行了FDA/ISO 10993和USP六级生物评定试验。Eastar聚酯MN052不含脱模剂。它具有较高的弯曲模量和屈服强度。该产品具有高流量特性。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所（GEI）许可使用的注册认证标志。GEI是一个行业独立的非盈利组织，负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划，用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息，并获得Eastman共聚酯的可打印证书，请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company，然后单击搜索以显示我们的产品列表。 Eastar™ Polyester MN052 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

产品描述
厂家：	美国伊士曼 Eastman	美国伊士曼 Eastman
类别：	PCTG PCTG	PCTG PCTG
填料：
用途：	药品包装,医疗/护理用品,医用包装,泡沫	实验室器具,医疗/护理用品
性能特点：	热封性好,可回收,发泡性好,细菌阻隔,电子束消毒,生物兼容性,辐射消毒,环氧乙烷消毒,无定形的 Good heat sealing,Renewable resources,Foaming performance,Antimicrobial properties,E-beam disinfection,Biocompatible,Radiation disinfection,Ethylene oxide disinfection,Amorphous	机械强度好,流动性高,结晶,电子束消毒,颜色稳定,辐射消毒,耐化学性,均聚物 Good Rigidity,High liquidity,Crystal,E-beam disinfection,Good color stability,Radiation disinfection,Solvent resistance,Homopolymer
加工条件：	热成型 Thermo forming

技术参数

物理性能
PHYSICAL Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

吸水率(23℃，24hr)
Water absorption rate % ASTM D570

密度
Density g/cm³ ASTM D792

收缩率(MD：3.2 mm)
Shrinkage rate % ASTM D955

薄膜
Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

--
-- µm

Graves Tear(MD)
Graves Tear kN/m ASTM D1004

Graves Tear(TD)
Graves Tear kN/m ASTM D1004

弹性模量(MD)
Elastic modulus MPa ASTM D882

弹性模量(TD)
Elastic modulus MPa ASTM D882

拉伸应变(MD，屈服)
Tensile strain % ASTM D882

拉伸应变(MD，断裂)
Tensile strain % ASTM D882

拉伸应变(TD，屈服)
Tensile strain % ASTM D882

拉伸应变(TD，断裂)
Tensile strain % ASTM D882

拉伸强度(MD，屈服)
tensile strength MPa ASTM D882

拉伸强度(MD，断裂)
tensile strength MPa ASTM D882

拉伸强度(TD，屈服)
tensile strength MPa ASTM D882

拉伸强度(TD，断裂)
tensile strength MPa ASTM D882

薄膜厚度(测试)
film thickness ASTM D374

冲击性能
IMPACT Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch ASTM D4218

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ASTM D4218

装有测量仪表的落镖冲击(Max Load)
Dart impact equipped with measuring instruments N ASTM D3763

光学性能
OPTICAL Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

不透明
Opaque % 内部方法

热性能
THERMAL Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

维卡软化温度
Vicat Softening Temp ℃ ASTM D1525 2

电气性能
ELECTRICAL Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

介电常数(23 ℃，1 kHz)
Dielectric constant ASTM D150

介电常数(23 ℃，1 MHz)
Dielectric constant ASTM D150

介电强度(23℃)
Dielectric strength kV/mm ASTM D149

耐电弧性
Arc resistance sec ASTM D495

耗散因数(23℃，1 kHz)
Dissipation factor ASTM D150

耗散因数(23℃，1 MHz)
Dissipation factor ASTM D150

机械性能
MECHANICAL Eastalite™ Copolyester MP007F Eastar™ MN052 单位
UNIT 测试方法
TEST METHOD

弯曲强度(屈服，23℃)
bending strength MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ASTM D790

拉伸应变(屈服，23℃)
Tensile strain % ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(断裂，23℃)
tensile strength MPa ASTM D638

洛氏硬度(R 级)
Rockwell hardness ASTM D785

加工方式

注射 Eastalite™ Copolyester MP007F Eastar™ MN052 单位测试方法

加工熔体温度 °C

干燥时间 hr

干燥温度 °C

模具温度 °C

备注

1 一般属性：这些不能被视为规格。

2 Thickness of Each Eastar™ Copolyester Skin Layer

3 Total Thickness of A/B/A Sheet Tested

1 一般属性：这些不能被视为规格。

2 压力1 (10N)

3 方法A（短时间）


相关资讯

牌号简介
产品描述
技术参数
物理性能
薄膜
冲击性能
光学性能
热性能
电气性能
机械性能
加工方式
注射
备注
返回顶部

PCTG，Eastalite™ Copolyester MP007F对比 PCTG，Eastar™ MN052对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别