Teflon® PTFE DISP 35
PTFE & 美国科慕
Avalon 07
PTFE & 美国Greene
牌号信息 |
PTFE & 美国科慕 指导价格:暂无 塑料库存: 缺货 |
PTFE & 美国Greene 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
杜邦特氟隆聚四氟乙烯Disp 35是一种乳白色水性聚四氟乙烯分散液,用阴离子分散剂稳定。它用于与各种填料共凝,以生产具有应用所需的各种强度、多孔性和颜色的产品。使用增强剂可提供以下优点:提高抗穿透性和耐磨性、增加尺寸和形状稳定性、更高的散热率和更大的耐磨性。经适当处理后,Disp 35中的聚四氟乙烯树脂表现出氟聚合物树脂典型的优越性能:在260°C(500°F)下使用后保持性能,在-240°C(-400°F)下保持有用性能。Disp 35水分散液提供:对几乎所有工业化学品和溶剂的共凝惰性的能力高温下的稳定性优异的介电性能任何固体材料的最低摩擦系数不粘特性典型应用Disp 35用于制备用于高浓度涂料的混合物。性能轴承和密封件。Disp35还可以与特殊成分共凝,形成特定的最终用途,如燃料电池电极。特氟隆聚四氟乙烯Disp 35符合ASTM D 4441-98,I型,2级,A级的要求。 DuPont™ Teflon ® PTFE DISP 35 is a milky white aqueous PTFE dispersion stabilized with an anionic dispersant. It is used for co-coagulation with various fillers to produce products with a range of strengths, porosities and colors required for the application. The use of reinforcing agents can offer such advantages as improved resistance to cut-through and abrasion, increased dimensional and form stability, higher rate of heat dissipation and greater resistance to wear. When properly processed, the PTFE resin in DISP 35 exhibits the superior properties typical of the fluoropolymer resin: retention of properties after service at 260 °C (500 °F), and useful properties at -240 °C (-400 °F). DISP 35 aqueous dispersion provides: ability for co-coagulation inertness to nearly all industrial chemicals and solvents stability at high temperatures excellent dielectric properties lowest coefficient of friction of any solid material non-stick characteristics Typical Applications DISP 35 is used in the preparation of blends for coating of high performance bearings and seals. DISP 35 can also be co-coagulated with special ingredients to be formed into specific end-uses, such as fuel cell electrodes. Teflon ® PTFE DISP 35 meets the requirements of ASTM D 4441-98, type I, grade 2, class A. |
Avalon 07是一种聚四氟乙烯 (PTFE)产品,。 它,在北美洲有供货。 主要特性为:润滑。 Avalon 07 is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Primary characteristic: lubricated. |
|
产品描述 | |||
厂家: | 美国科慕 Chemours | 美国Greene | |
类别: | PTFE PTFE | PTFE PTFE | |
填料: | |||
用途: | 涂层应用,混合 | ||
性能特点: | 无粘性,电气性好,低摩擦系数,耐化学性 No viscosity,Good Electrical Properties,Low coefficient of friction,Solvent resistance | 润滑性 Lubricating | |
加工条件: | 浸渍涂布法 Dipping coating method |
备注 |
1 一般属性:这些不能被视为规格。
2 of Sintered Resin
3 at 35% solids
|
1 一般属性:这些不能被视为规格。
2 33.3 psi, 150 fpm
3 33.3 psi
|
价格走势对比图
PTFE Teflon® PTFE DISP 35
PTFE Avalon 07
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交