DeWAL DW 200
PTFE & 美国DeWAL
POLYFLON™ M-111
PTFE & 日本大金氟化工
牌号信息 |
PTFE & 美国DeWAL 指导价格:暂无 塑料库存: 缺货 |
PTFE & 日本大金氟化工 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
D/W 200是从改性的均聚聚四氟乙烯树脂中剥离出来的,它含有比我们的220膜中更高水平的全氟化共聚单体。共聚单体的加入使材料的电性能和物理性能得到改善。这种薄膜可以热粘合(熔合)到自身(625-650华氏度)。改性均聚物树脂的耐化学性能与均聚物聚四氟乙烯相当。其拉伸强度比均聚聚四氟乙烯高约25%,延伸率比均聚聚四氟乙烯高约60%。由于这些特性,D/W 200通常是熔融可加工薄膜(如PFA)的良好替代品。D/W 200可热熔合至自身,使需要这些特性的结构的制造成为可能。D/W 200还可用作电气和电子电缆应用中的高介电强度易熔包。它也可作为电路板工业中的一种粘合膜。 D/W 200 is skived from a modified homopolymer PTFE resin containing a higher level of a fully fluorinated comonomer than is in our 220 film. The incorporation of the comonomer yields a material with improved electrical and physical properties. This film can be thermally bonded (fused) to itself (625 - 650 degrees F). The modified homopolymer resin exhibits chemical resistance equivalent to that of homopolymer PTFE. Its tensile strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE. Because of these properties D/W 200 is often a good substitute for melt Processable films such as PFA. D/W 200 may be thermally fused to itself making possible the fabrication of structures requiring these properties. D/W 200 can also be used as a high dielectric strength fusible wrap in electrical and electronic cable applications. It can also be used as a bonding film in the circuit board industry. |
Polyflon M-111 Daikin PTFE(聚四氟乙烯)成型粉末是优良的精细切割树脂,非常适合各种苛刻的化学、机械、电气和非黏性表面应用。这些聚四氟乙烯树脂完全氟化,具有所有氟聚合物的最佳热、电和化学性能,其连续工作额定值为500°F(260°C)。Daikin聚四氟乙烯成型粉末有均聚物和改良的细切削等级。Daikin聚四氟乙烯成型粉末可在260°C(500°F)以下的温度下连续使用,在更高的温度下可短期使用。它们还具有优异的低温强度。Daikin聚四氟乙烯成型粉完全惰性,除高温、高压元素氟气、熔融碱金属和三氟化氯外,其他所有化学品均能对其进行侵蚀。非极性分子结构使大金聚四氟乙烯成型粉成为高频绝缘材料的理想选择。在较宽的频率范围内,介电常数和损耗因数均较低。在正常使用条件下,大金聚四氟乙烯成型粉具有任何固体材料的最低摩擦系数。而且,这些产品的不粘特性阻止了大多数材料粘附在它们上面。化学/机械填料、垫片、隔膜、波纹管、耐腐蚀衬里、管道部件、泵部件、O形圈、V形圈、衬套、滑动轴承等。电气/其他绝缘刮皮胶带、绝缘套管、端子、连接器、插座、垫片、电子零件、实验室设备等。E M系列是一种用于压缩成型的颗粒状粉末。由于熔体粘度极高,不能用于一般塑料的成型。因此,首先,它被压缩在模具中,并通过在其熔点上烧结而熔化。开发了各种成型方法。聚四氟乙烯的应用有多种类型,在模具加工和应用中的方法、条件等。具有优异的抗蠕变性能、高延伸率、优异的介电强度和极光滑的表面。适用于容器衬里、垫片等的制造。 Daikin PTFE (polytetrafluoroethylene) molding powders are excellent, fine cut resins, well suited for a variety of demanding chemical, mechanical, electrical and non-stick surface applications. These PTFE resins are fully fluorinated and have the best thermal, electrical, and chemical properties of all fluoropolymers with a continuous service rating of 500°F (260°C). Daikin PTFE molding powders are available in homopolymer and modified fine cut grades. |
|
产品描述 | |||
厂家: | 美国DeWAL | 日本大金氟化工 Daikin Fluorochemicals | |
类别: | PTFE PTFE | PTFE PTFE | |
填料: | |||
用途: | 电子电缆护套材料,电气/电子应用领域,粘合,薄膜 | 衬套,绝缘屏蔽,隔膜,管道系统,带子,轴承,实验室器具,连接器,泵件,包装,垫圈,衬里,片材,电气元件 | |
性能特点: | 电气性好,耐化学性,均聚物 Good Electrical Properties,Solvent resistance,Homopolymer | 无粘性,韧性好,高粘度,低摩擦系数,高分子量,拉伸性能好,耐化学性,焊接,耐低温强度 No viscosity,Good flexibility,High Viscosity,Low coefficient of friction,High molecular weight,Good Tensile Strength,Solvent resistance,Welding,Low temperature strength | |
加工条件: | 压缩模塑 |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
2 off set, 10x20 mm sample
3 10x20 mm sample
4 13.7 MPa
5 6.9 MPa
|
价格走势对比图
PTFE DeWAL DW 200
PTFE POLYFLON™ M-111
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交