Moplen EP301G
PP均聚 & 荷兰利安德巴塞尔
ISPLEN® PB 130 G1F
PP均聚 & 西班牙莱普索尔
牌号信息 |
PP均聚 & 荷兰利安德巴塞尔 指导价格:暂无 塑料库存: 缺货 |
PP均聚 & 西班牙莱普索尔 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
澳大利亚利安德巴塞尔公司的聚丙烯级EP301G是一种具有常规分子量分布的低流动冲击共聚物,采用通用添加剂包装配制而成。EP301G是专为挤出和吹塑应用而设计的,要求在低零件重量下具有良好的熔融强度和冲击强度。最终用途产品通常由EP301G制成,包括吹塑制品、挤压板、瓦楞纸板和挤压型材。 LyondellBasell Australia's Polypropylene grade EP301G is a low flow impact copolymer with a conventional molecular weight distribution and is formulated with a general-purpose additive package. EP301G is designed for extrusion and blow-moulding applications requiring good melt strength and good impact strength at low part weight. End use products typically made from EP301G include blow-moulded articles, extruded sheet, corrugated board and extruded profiles. |
ISPLEN® PB 130 G1F是专为挤出应用而设计的具有中-低流动性的异相共聚物。它具有良好的加工性能和较高的机械性能,尤其是在低温下也具有较高的冲击强度。ISPLEN® PB 130 G1F可以在挤出过程中使用合适的颜料容易着色,最好是以比基础聚合物具有更高熔体流动速率的浓缩物的形式。在挤出和吹塑工艺中的典型应用,例如:具有良好表面光泽的薄膜和片材管道吹塑推荐的熔融温度范围为190至250°C。应为每条生产线优化加工条件。 ISPLEN® PB 130 G1F is a heterophasic copolymer with medium-low fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. ISPLEN® PB 130 G1F can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion and blow-moulding processes, such as: Films and sheets with a good surface gloss Pipes Blow- moulding Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. |
|
产品描述 | |||
厂家: | 荷兰利安德巴塞尔 LyondellBasell | 西班牙莱普索尔 REPSOL | |
类别: | PP均聚 PP homopolymerization | PP均聚 PP homopolymerization | |
填料: | |||
用途: | 增强面板,片材,型材,波形板,吹塑成型应用 | 吹塑成型应用,管道系统,薄膜,片材 | |
性能特点: | 流动性低,冲击性能好,食品接触,熔体强度好,抗冲共聚物 Low liquidity,High impact resistance,Food contact compliance,Good melt strength,Impact copolymer | 易加工,冲击性能好,食品接触,流动性中等,耐低温冲击,着色性好 Excellent Processability,High impact resistance,Food contact compliance,Moderate liquidity,low-temperature impact resistance,Good coloring | |
加工条件: | 挤出 Extrusion | 挤出 Extrusion |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
|
价格走势对比图
PP均聚 Moplen EP301G
PP均聚 ISPLEN® PB 130 G1F
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交