Extir® CM Giotto 5 AE
PS(EPS) & 意大利Versalis
Extir® LN 2001
PS(EPS) & 意大利Versalis
牌号信息 |
PS(EPS) & 意大利Versalis 指导价格:暂无 塑料库存: 缺货 |
PS(EPS) & 意大利Versalis 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
extir-cm是采用新的连续质量技术生产的新的可扩展产品系列。所有产品都具有很低的尺寸分散度和减少的发泡剂含量。Extir CM不包含CFC或HCFC。Extir® CM Giotto 5 AE是一种具有改良导热性的白色产品。Extir® CM Giotto 5 AE具有改进的隔热系数。它主要用于建筑行业,出于立法或安全原因,需要使用阻燃材料。典型应用是:通用绝缘块,外部隔热板,带改进的lambda Extir CM is the new expandable product range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC. Extir CM Giotto 5 AE is a white product with improved thermal conductivity. Extir CM Giotto 5 AE has an improved coefficient of thermal insulation. It is used mainly in the construction sector where, for legislative or safety reasons, the use of a flame retardant material is required. Typical applications are: blocks for general purpose insulation external thermal insulation boards with improved lambda |
Extir® LN 2001属于一个新的可扩展产品系列,即Leonardo系列。Extir® LN 2001是一种特殊的涂层,用于砖、混凝土、砂浆和灰泥中,以减轻重量并提高隔热性能。Extir® LN 2001的典型应用是生产:低导热率的多孔砖。预泡珠在挤压前与粘土混合物混合,在砖烘烤阶段蒸发,留下直径为1-3 mm的空隙的内部多孔结构。获得的砖重量减轻20%,导热系数约为0.2 w/m°K。轻质混凝土导热系数低。在混凝土搅拌阶段,在涂上合适的润湿剂后,加入预泡沫珠,从而形成密度低至200 kg/m³的轻质砂浆。用于灰泥和隔热地板时,典型砂浆密度为300-400 kg/m³,导热系数约为0.1 W/m°K。 Extir LN 2001 belongs to a new expandable product family, the Leonardo Series. Extir LN 2001 is specially coated to be incorporated into bricks, concrete, mortar and plaster, in order to lighten them and to improve their thermal insulation. Typical applications of Extir LN 2001 are production of: cellular bricks of low thermal conductivity. The prefoamed beads, blended with a clay mixture before extrusion, are vapourised during the brick baking phase, leaving an internal cellular structure with voids of 1-3 mm diameter. The bricks obtained are up to 20 % lighter and the heat conductivity is about 0.2 W/m°K. lightened concrete with low thermal conductivity. The prefoamed beads, after coating with a suitable wetting agent, are added during the concrete mixing phase resulting in lightweight mortars with densities down to 200 kg/m³. For use in plaster and for insulated floors, typical mortar densities are 300-400 kg/m³, giving a heat conductivity of approximately 0.1 W/m°K. |
|
产品描述 | |||
厂家: | 意大利Versalis | 意大利Versalis | |
类别: | PS(EPS) PS (EPS) | PS(EPS) PS (EPS) | |
填料: | |||
用途: | 绝缘材料,片材 | 建筑材料,建筑应用领域 | |
性能特点: | 热绝缘,发泡性好,阻燃,导热 Thermal insulation,Foaming performance,Flame Characteristics,Thermal conductivity | 热绝缘,发泡性好 Thermal insulation,Foaming performance | |
加工条件: |
备注 |
1 一般属性:这些不能被视为规格。
2 on a discontinuous pre-expander
3 on a continuous pre-expander after one expansion
|
1 一般属性:这些不能被视为规格。
2 on a continuous pre-expander after two expansions
3 on a continuous pre-expander after one expansion
|
价格走势对比图
PS(EPS) Extir® CM Giotto 5 AE
PS(EPS) Extir® LN 2001
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交