Boda BDT2461I
氟橡胶 & 成都晨光博达
Boda BDT246-2CP
氟橡胶 & 成都晨光博达
牌号信息 |
氟橡胶 & 成都晨光博达 指导价格:暂无 塑料库存: 缺货 ![]() |
氟橡胶 & 成都晨光博达 指导价格:暂无 塑料库存: 缺货 ![]() |
![]() |
牌号简介 |
BDT2461I是一种低粘度固化型含氟弹性体三元共聚物。该等级非常适用于要求流动性好、流体阻力优于共聚物的场合。BDT2461I可以复合以满足主要的氟橡胶规格。BDT2461I可用于注塑和传递成型,以及O形圈和垫圈的挤压。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDT2461I is a low viscosity curative incorporated fluoroelastomer terpolymer. This grade is well suited for application where good flowability and superior fluid resistance than copolymers are required. BDT2461I can be compounded to meet the major fluoroelastomer specifications. BDT2461I can be used for injection and transfer molding, and extrusion of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
bdt246-2cp是一种中高粘度固化型含氟弹性体三元共聚物。该等级非常适合于要求具有良好加工性能和比标准三元共聚物更好的耐流体性的应用。bdt246-2cp可以复合以满足主要的氟橡胶规格。bdt246-2cp可用于O型圈和垫圈的压缩成型。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDT246-2CP is a medium to high viscosity curative incorporated fluoroelastomer terpolymer. This grade is well suited for application where good processing properties and superior fluid resistance than standard terpolymers are required. BDT246-2CP can be compounded to meet the major fluoroelastomer specifications. BDT246-2CP can be used for compression molding of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
|
产品描述 | |||
厂家: | 成都晨光博达 Fluoro | 成都晨光博达 Fluoro | |
类别: | 氟橡胶 氟橡胶 | 氟橡胶 氟橡胶 | |
填料: | |||
用途: | 垫圈,复合 | 垫圈,复合 | |
性能特点: | 易流动,低粘度,三元共聚物 Good liquidity,Low Viscosity,Terpolymer | 易加工,三元共聚物 Excellent Processability,Terpolymer | |
加工条件: | 复合 | 复合 |
备注 |
1 一般属性:这些不能被视为规格。
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
|
1 一般属性:这些不能被视为规格。
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
|
价格走势对比图
氟橡胶 Boda BDT2461I
氟橡胶 Boda BDT246-2CP
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交