FM® 475
马来酸酐接枝共聚物 & 美国氰特
HTM® 515-1
马来酸酐接枝共聚物 & 美国氰特
牌号信息 |
马来酸酐接枝共聚物 & 美国氰特 指导价格:暂无 塑料库存: 缺货 |
马来酸酐接枝共聚物 & 美国氰特 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
FM® 475是一种由中空玻璃微气球强化的bmi句法核心材料。FM® 475句法核心被设计为制造厚度小于0.20英寸(5.1毫米)的刚性关键复合板的成本和/或重量节约的替代品。FM® 475句法核心基于Cycom 5250-4树脂化学,可提供最高425°F(218°C)的高温性能。它与Cycom 5250-4预浸料和其他bmi树脂系统兼容。FM® 475将与这些复合材料共同固化,而不使用粘合膜。标准FM® 475提供了一个104玻璃屏幕作为载体,这提高了处理特性,除了增加材料的抗弯强度。可根据要求提供替代载体,如碳纤维、玻璃或Kevlar垫。FM® 475在两层离型纸之间以薄片或卷筒形式提供。建议应用:重量、成本和/或刚度至关重要的薄复合板 FM® 475 is a BMI syntactic core material which is reinforced with hollow glass micro-balloons. FM 475 syntactic core is designed as a cost and/or weight saving alternative in the manufacture of thin [below 0.20 inches (5.1 mm) thick], stiffness critical composite panels. FM 475 syntactic core is based on CYCOM® 5250-4 resin chemistry to provide a high temperature capability with a service rating up to 425°F (218°C). It is compatible with CYCOM 5250-4 prepreg and other BMI resin systems. FM 475 will co-cure with these composites without the use of an adhesive film. Standard FM 475 is supplied with a 104 glass scrim as a carrier, which improves handling characteristics in addition to increasing the material's flexural strength. Alternate carriers such as carbon, glass or Kevlar ® mat can be provided upon request. FM 475 is supplied in sheet or roll form between two layers of release paper. Suggested Applications: Thin composite panels where weight, cost and/or stiffness are critical |
HTM® 515-1是一种控制流量的高温双马来酰亚胺(BMI)树脂模具基体系统,提供改进的搬运特性,经过适当的后固化后,热循环能力高达250°C(482°F)。HTM® 515-1以一系列标准预浸料形式提供,用于制造高温复合模具。 HTM® 515-1 is a controlled flow, high temperature bismaleimide (BMI) resin tooling matrix system offering improved handling characteristics and after appropriate post-cure, thermal cycling capability up to 250°C (482°F). HTM 515-1 is supplied in a range of standard prepreg formats for the manufacture of high temperature composite tooling. |
|
产品描述 | |||
厂家: | 美国氰特 Cytec Industries | 美国氰特 Cytec Industries | |
类别: | 马来酸酐接枝共聚物 马来酸酐接枝共聚物 | 马来酸酐接枝共聚物 马来酸酐接枝共聚物 | |
填料: | 碳纤维 | 碳纤维 | |
用途: | 构件,薄壁部件 | 模具 | |
性能特点: | 机械强度好,耐高温 Good Rigidity,High Heat Resistance | 耐高温,耐高压加热性 High Heat Resistance,High pressure heat resistance | |
加工条件: |
备注 |
1 一般属性:这些不能被视为规格。
2 Flatwise tensile
3 Block compression
4 TMA
|
1 一般属性:这些不能被视为规格。
2 Cured resin
3 6 hours at 190°C (374°F), 6.2bar (90psi)
|
价格走势对比图
马来酸酐接枝共聚物 FM® 475
马来酸酐接枝共聚物 HTM® 515-1
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交