PA66，Vydyne® 63A对比PA66，ECONAMID® FL 66H1物性表,价格行情_搜料

牌号信息	Vydyne® 63A 物性表 PA66 & 美国奥升德指导价格：暂无塑料库存：缺货	ECONAMID® FL 66H1 物性表 PA66 & 德国道默指导价格：暂无塑料库存：缺货
牌号简介	Vydyne® 63A (干燥 ) Vydyne 63A is a medium-viscosity PA66 resin suitable for injection-molding, extrusion and compounding applications. It is available in natural color only. Vydyne 63A resin offers high strength, rigidity and toughness over a broad range of demanding applications and good fluid resistance to a wide variety of chemicals, solvents and oils. Typical Applications/End Uses: Typical uses include packaging films, monofilaments, bristles, rods, tubing and sheet. Vydyne® 63A Vydyne 63A is a medium-viscosity resin used for injection-molding and extrusion-compounding. It is desirable to include this neat resin in a formulation in which the melt strength of the final product is critical for the application. Vydyne 63A exhibits good initial color and it has a moisture level below 0.1%. This product offers high strength, rigidity and toughness over a broad range of demanding applications. Resistance of Vydyne 63A to heat, oil and wear is typical of PA66 neat resins. Vydyne® 63A (Dry) Vydyne 63A is a medium-viscosity PA66 resin suitable for injection-molding, extrusion and compounding applications. It is available in natural color only. Vydyne 63A resin offers high strength, rigidity and toughness over a broad range of demanding applications and good fluid resistance to a wide variety of chemicals, solvents and oils. Vydyne® 63A Vydyne 63A is a medium-viscosity resin used for injection-molding and extrusion-compounding. It is desirable to include this neat resin in a formulation in which the melt strength of the final product is critical for the application. Vydyne 63A exhibits good initial color and it has a moisture level below 0.1%. This product offers high strength, rigidity and toughness over a broad range of demanding applications. Resistance of Vydyne 63A to heat, oil and wear is typical of PA66 neat resins.	（Econamid 66flh）注模用热稳定聚酰胺66 (ECONAMID 66FLH) Polyamide 66, heat stabilized, for injection moulding

产品描述
厂家：	美国奥升德 Ascend	德国道默 DOMO
类别：	PA66 PA66	PA66 PA66
填料：
用途：	管件,复合,通用,工业应用,片材,流延薄膜,单丝,棒材,食品包装
性能特点：	机械强度好,韧性好,颜色稳定,熔体强度好,耐油,耐化学性,耐汽油 Good Rigidity,Good flexibility,Good color stability,Good melt strength,Grease resistance,Solvent resistance,Gasoline resistance	热稳定性好 Heat Stabilized
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL Vydyne® 63A ECONAMID® FL 66H1 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183

粘度测定
Viscosity measurement cm³/g ISO 307

冲击性能
IMPACT Vydyne® 63A ECONAMID® FL 66H1 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃)
Izod Notched Impact strength kJ/m² ISO 180-1A

热性能
THERMAL Vydyne® 63A ECONAMID® FL 66H1 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
HDT ℃ ISO 75-2/B

热变形温度(1.8 MPa，未退火)
HDT ℃ ISO 75-2/A

熔融温度
Melting temperature ℃ ISO 11357-3

维卡软化温度(B50)
Vicat Softening Temperature ℃ ISO 306

电气性能
ELECTRICAL Vydyne® 63A ECONAMID® FL 66H1 单位
UNIT 测试方法
TEST METHOD

体积电阻率
Volume resistivity ohms·cm IEC 60093

表面电阻率
Surface resistivity ohms IEC 60093

阻燃性能
FLAMMABILITY Vydyne® 63A ECONAMID® FL 66H1 单位
UNIT 测试方法
TEST METHOD

0.80 mm
0.80 mm UL 94

燃烧速率
Burning Speed mm/min FMVSS 302

机械性能
MECHANICAL Vydyne® 63A ECONAMID® FL 66H1 单位
UNIT 测试方法
TEST METHOD

弯曲模量
Flexural Modulus MPa ISO 178

拉伸应变(断裂)
Tensile strain % ISO 527-2/50

拉伸强度(屈服)
tensile strength MPa ISO 527-2/50

拉伸模量
Tensile modulus MPa ISO 527-1-2

洛氏硬度(R 级)
Rockwell hardness ISO 2039-2

加工方式

注射 Vydyne® 63A ECONAMID® FL 66H1 单位测试方法

加工熔体温度 °C

干燥时间 hr

干燥温度 °C

模具温度 °C

水份含量 %

备注

1 一般属性：这些不能被视为规格。

2 Formic acid

2、2.0 mm/min


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
机械性能
加工方式
注射
备注
返回顶部

PA66，Vydyne® 63A对比PA66，ECONAMID® FL 66H1对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别