Algoflon® F 5/S
PTFE & 比利时索尔维
POLYFLON™ M-15
PTFE & 日本大金氟化工
牌号信息 |
PTFE & 比利时索尔维 指导价格:暂无 塑料库存: 缺货 |
PTFE & 日本大金氟化工 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
Algoflon® F 5/S是一种精细切割的均聚聚四氟乙烯粉末,为白色、颗粒状和非自由流动粉末。它是为化合物生产而设计的,特别是推荐用于高填充物含量的场合。这种材料具有高体积密度、拉伸强度和断裂伸长。基于Algoflon F5/S的黑色化合物表现出最佳的各向同性行为,因此具有优良的纵向力学性能。Algoflon® F 5/S的主要特点是:高体积密度,很好的机械性能,优良的可分解性,很好的电性能,各向同性。 Algoflon® F 5/S is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with high filler content. This material exhibits high bulk density, tensile strength and elongation at break. Black compounds based on Algoflon® F5/S show optimum isotropic behaviour and therefore excellent longitudinal mechanical properties. Main features of Algoflon® F 5/S are: High bulk density Very good mechanical properties Excellent blendability Very good electrical properties Isotropic properties |
大金聚四氟乙烯(聚四氟乙烯)成型粉末是优良的,精细切割树脂,非常适合各种苛刻的化学,机械,电气和非黏性表面应用。这些聚四氟乙烯树脂完全氟化,具有所有氟聚合物的最佳热、电和化学性能,其连续工作额定值为500°F(260°C)。Daikin聚四氟乙烯成型粉末有均聚物和改良的细切削等级。Daikin聚四氟乙烯成型粉末可在260°C(500°F)以下的温度下连续使用,在更高的温度下可短期使用。它们还具有优异的低温强度。Daikin聚四氟乙烯成型粉完全惰性,除高温、高压元素氟气、熔融碱金属和三氟化氯外,其他所有化学品均能对其进行侵蚀。非极性分子结构使大金聚四氟乙烯成型粉成为高频绝缘材料的理想选择。在较宽的频率范围内,介电常数和损耗因数均较低。在正常使用条件下,大金聚四氟乙烯成型粉具有任何固体材料的最低摩擦系数。而且,这些产品的不粘特性阻止了大多数材料粘附在它们上面。化学/机械填料、垫片、隔膜、波纹管、耐腐蚀衬里、管道部件、泵部件、O形圈、V形圈、衬套、滑动轴承等。电气/其他绝缘刮削带、绝缘套管、端子、连接器、插座、垫片、电子零件、实验室设备等。 Daikin PTFE (polytetrafluoroethylene) molding powders are excellent, fine cut resins, well suited for a variety of demanding chemical, mechanical, electrical and non-stick surface applications. These PTFE resins are fully fluorinated and have the best thermal, electrical, and chemical properties of all fluoropolymers with a continuous service rating of 500°F (260°C). Daikin PTFE molding powders are available in homopolymer and modified fine cut grades. Daikin PTFE molding powders can be used continuously at temperatures up to 260°C (500°F) and for short periods of time at higher temperatures. They also possess excellent low temperature strength. Daikin PTFE molding powders are completely inert to attack by all chemicals except hightemperature, high-pressure elemental fluorine gas, molten alkaline metals and chlorine trifluoride. The non-polar molecular structure makes Daikin PTFE molding powders ideal for use as high-frequency insulating material. The dielectric constant and dissipation factor are uniformly low over a wide frequency range. Under ordinary conditions of use, Daikin PTFE molding powders possess the lowest coefficient of friction of any solid material. Also, the non-stick properties of these products prevent most materials from adhering to them. Chemical/Mechanical—Packings, gaskets, diaphragms, bellows, corrosion-resistant linings, piping components, pump parts, O-rings, V-rings, bushings, slide bearings, etc. Electrical/Other—Insulating skived tape, insulating sleeves, terminals, connectors, sockets, spacers, electronic parts, laboratory equipment, etc. |
|
产品描述 | |||
厂家: | 比利时索尔维 Solvay | 日本大金氟化工 Daikin Fluorochemicals | |
类别: | PTFE PTFE | PTFE PTFE | |
填料: | PTFE | PTFE | |
用途: | 添加剂,混合 | 绝缘屏蔽,管道系统,带子,实验室器具,隔膜,垫圈,包装,衬里,通用,连接器,衬套,电气元件,轴承,泵件 | |
性能特点: | 耐化学性 Solvent resistance | 无粘性,高粘度,低摩擦系数,高分子量,耐化学性,耐低温强度,均聚物 No viscosity,High Viscosity,Low coefficient of friction,High molecular weight,Solvent resistance,Low temperature strength,Homopolymer | |
加工条件: | 烧结 sintering |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
2 off set, 10x20 mm sample
3 10x20 mm sample
4 13.7 MPa
5 6.9 MPa
|
价格走势对比图
PTFE Algoflon® F 5/S
PTFE POLYFLON™ M-15
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交