乙烯基酯，CoREZYN® CORVE8295对比乙烯基酯，Vipel® F010-BNT-00物性表,价格行情_搜料

牌号信息	CoREZYN® CORVE8295 物性表乙烯基酯 & 美国Interplastic 指导价格：暂无塑料库存：缺货	Vipel® F010-BNT-00 物性表乙烯基酯 & 美国AOC 指导价格：暂无塑料库存：缺货
牌号简介	塑料间公司有可靠的CIPP“绿色”树脂，可以让你修复部分或完全恶化的地下管道，考虑到环境安全。塑料间的突破性生态系列树脂没有苯乙烯，没有挥发性有机化合物，没有HAPS。这些新树脂与目前批准用于管道修复的聚合物骨架相同，是重力管道中经验证的解决方案，提供一致的质量、快速浸湿、无故障处理、优越的强度和较高的弯曲模量特性。它们符合ASTM F216的要求，降低了低温下应力开裂和收缩的可能性。 Interplastic Corporation has dependable CIPP "green" resins that lets you repair partially or fully deteriorated underground pipes with environmental safety in mind. Interplastic's ground-breaking Eco Series Resins have no styrene, no VOCs and no HAPs. With the same polymer backbone approved for today's pipeline remediation, these new resins are a proven solution in gravity pipelines providing consistent quality, fast wet out, trouble-free processing, superior strength and higher flexural modulus properties. They meet ASTM F216 requirements and reduce the likelihood of stress cracking and shrinkage with the lower exotherm.	AOC的VipelF010系列是一种溶于苯乙烯的双酚A环氧乙烯基酯树脂。VIPEL F010系列非常适合用于手工铺层、喷涂、纤维缠绕、SMC和拉挤成型工艺，其中突出的机械性能和优异的耐化学品和耐热性是必需的。优点：多功能宽配方设计功能可用于许多流程，并可优化成本/性能。独特的组成产生了一个坚韧和多用途的树脂，具有优异的裂缝和耐开裂性的模件。Vipel F010适用于承受特别高静态或动态载荷的模具，如管道、水箱、管道工程和地板应用。乙烯基酯树脂具有优异的耐热性。耐腐蚀性强的VipelF010对过氧化氢和碱有很高的抵抗力，在次氯酸盐和氯气生产的各个阶段表现良好。请参阅AOC的“耐腐蚀树脂指南”，了解耐腐蚀信息或有关树脂适用于任何特定化学环境的问题，请联系AOC。 AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. BENEFITS Versatile Wide formulating capabilities allow for use in many processes and for optimization of cost/performance. Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts. Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat. Corrosion Resistance Vipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

产品描述
厂家：	美国Interplastic	美国AOC
类别：	乙烯基酯乙烯基酯	乙烯基酯乙烯基酯
填料：
用途：	管道系统,管件	水箱,地板材料,管道系统
性能特点：	机械强度好,易加工,低放热性 Good Rigidity,Excellent Processability,Low Exotherm	韧性好,耐碱,耐腐蚀,耐高温,机械强度好-撕裂,耐化学性,抗应力开裂 Good flexibility,Alkali resistant,Corrosion Resistant,High Heat Resistance,Good tear strength,Solvent resistance,High ESCR
加工条件：		手工涂敷

技术参数

物理性能
PHYSICAL CoREZYN® CORVE8295 Vipel® F010-BNT-00 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³

苯乙烯含量
styrene content %

补充信息
CoREZYN® CORVE8295 Vipel® F010-BNT-00 单位
UNIT 测试方法
TEST METHOD

Catalyst(Perkadox)
Catalyst wt%

Catalyst(Trigonox C)
Catalyst wt%

Catalyzed Stability(23℃)
Catalyzed Stability（23℃） hr

Critical Strain Energy
Critical Strain Energy J/m² ASTM E399

Gel to Peak
Gel to Peak min

Stress Intensity Factor
Stress Intensity Factor ASTM E399

放热峰值
exothermic peak ℃

触变指数
Thixotropic index

Uncured Properties
CoREZYN® CORVE8295 Vipel® F010-BNT-00 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³

粘度
viscosity Pa·s

粘度(布络克菲尔德 RVT，25℃)
viscosity Pa·s

胶凝时间
Gelation time min

胶凝时间(25℃)
Gelation time min

热性能
THERMAL CoREZYN® CORVE8295 Vipel® F010-BNT-00 单位
UNIT 测试方法
TEST METHOD

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

玻璃化转变温度
Glass transition temperature ℃ DIN 53445

电气性能
ELECTRICAL CoREZYN® CORVE8295 Vipel® F010-BNT-00 单位
UNIT 测试方法
TEST METHOD

介电常数(1 kHz)
Dielectric constant DIN 53483

介电常数(1 MHz)
Dielectric constant DIN 53483

介电常数(60 Hz)
Dielectric constant DIN 53483

介电强度(0.7 mm)
Dielectric strength kV/mm DIN 53481

体积电阻率
Volume resistivity ohms·cm DIN 53482

耗散因数(1 kHz)
Dissipation factor DIN 53483

耗散因数(1 MHz)
Dissipation factor DIN 53483

耗散因数(60 Hz)
Dissipation factor DIN 53483

表面电阻率
Surface resistivity ohms DIN 53482

机械性能
MECHANICAL CoREZYN® CORVE8295 Vipel® F010-BNT-00 单位
UNIT 测试方法
TEST METHOD

压缩强度
compressive strength MPa ASTM D695

巴氏硬度
Babbitt hardness ASTM D2583

弯曲强度
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ASTM D638

备注

1 一般属性：这些不能被视为规格。

2 140°F water bath, time interval between 130°and 150°F

1 一般属性：这些不能被视为规格。

2 after 24 hrs in drinking water

3 Dry


相关资讯

牌号简介
产品描述
技术参数
物理性能
补充信息
Uncured Properties
热性能
电气性能
机械性能
加工方式
备注
返回顶部

乙烯基酯，CoREZYN® CORVE8295对比乙烯基酯，Vipel® F010-BNT-00对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别