Silopren® LSR 4660
硅橡胶,LSR & 美国迈图
Silopren® LSR 2671
硅橡胶,LSR & 美国迈图
牌号信息 |
硅橡胶,LSR & 美国迈图 指导价格:暂无 塑料库存: 缺货 |
硅橡胶,LSR & 美国迈图 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
LSR 4660是一种双组分液体硅橡胶注射成型工艺。材料性能的特点是高反应性、低粘度和高撕裂强度。LSR 4660特别能够生产USP第六类医疗设备的零件,如密封件、O形环、隔膜、耳塞、风箱、婴儿奶嘴、呼吸设备、排气口盖、管接头、导管和垫子。由LSR 4660组成的硫化液具有以下特点和优点:低粘度、快速固化、高撕裂强度、环氧乙烷、蒸汽和γ辐射灭菌、在动态应力中性气味下使用寿命长、穿刺后味道高、高温稳定性好、FDA 21 CFR 177.2600符合美国药典XXIII第六类(与人体组织接触的最长时间为28天) LSR 4660 is a two-component liquid silicone rubber for injection moulding processes. The material performance is particularly characterised by high reactivity, low viscosity and high tear strength. The LSR 4660 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats. Key Features and Benefits Vulcanisates consisting of LSR 4660 are distinguished by the following properties: low viscosity and fast cure high tear strength sterilisable with ethylene oxide, steam and gamma radiation long service life at dynamic stress neutral odour and taste high recovery after puncture high temperature stability FDA 21 CFR 177.2600 compliance with US Pharmacopoeia XXIII, Class VI (maximum contact time with human tissue 28 days) |
Silopren® LSR 2671 TP 3733是一种用于注射成型工艺的双组分液态硅橡胶。Silopren® LSR 2671 TP 3733与Silopren LSR 2670相比,显示了硫化后非固化级(NPC级)较低的压缩永久变形。由Silopren® LSR 2671 tp 3733组成的硫化液的主要特点和优点有以下特点:非后固化高反应性、优异的热稳定性、低温下的高稳定性和灵活性、良好的橡胶状性能、高抗撕裂性、动态应力下的长使用寿命、对臭氧和紫外线的高稳定性。ET-Light具有优异的抗老化性能,在广泛的温度范围内具有优异的介电性能,不易燃烧,不易熔化或滴落,可与LSR色浆着色,由于其优异的性能Silopren® LSR 2671 TP 3733特别适用于以下弹性体制品:密封G元件、O形圈、塞子、隔膜、键盘、波纹管、减震器、开关盖、火花塞护套、电缆接头S.O. Silopren LSR 2671 TP 3733 is a two-component liquid silicone rubber for injection moulding processes.Silopren LSR 2671 TP 3733 shows in comparison to Silopren LSR 2670 as non post-cure grade (NPC grade)a lower compression set after vulcanisation. Key Features and Benefits Vulcanisates consisting of Silopren LSR 2671 TP 3733 are distinguished by the following properties: non post-cure high reactivity excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties, high tear resistance long service life at dynamic stress high stability to ozone and ultraviolet light outstanding resistance to ageing, excellent dielectric behaviour over a wide range of temperatures, not readily combustible, does not melt or drip easy pigmentable with the LSR Colour Pastes Potential Applications Because of the outstanding properties Silopren LSR 2671 TP 3733 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers, diaphragms, keypads, bellows,vibration dampers, switch cover, spark plug boots, cable connectors s.o. |
|
产品描述 | |||
厂家: | 美国迈图 Momentive | 美国迈图 Momentive | |
类别: | 硅橡胶,LSR 硅橡胶,LSR | 硅橡胶,LSR 硅橡胶,LSR | |
填料: | |||
用途: | 医疗/护理用品,连接器,密封件,隔膜 | 密封件,隔膜,连接器 | |
性能特点: | 蒸汽消毒,低粘度,低VOC,机械强度好-撕裂,辐射消毒,热稳定性好,快速固化,环氧乙烷消毒,反应性高 Steam sterilized,Low Viscosity,Low odor,Good tear strength,Radiation disinfection,Heat Stabilized,Fast Cure,Ethylene oxide disinfection,High reactivity | 耐候抗UV,减震,耐低温柔性,机械强度好-撕裂,稳定性好,耐臭氧,热稳定性好,着色性好,反应性高 Weather resistance is good,noise reduction,Low temperature toughness,Good tear strength,Good stability,Ozone resistance,Heat Stabilized,Good coloring,High reactivity | |
加工条件: | 注射成型 Injection Molding | 注射成型 Injection Molding |
备注 |
1 一般属性:这些不能被视为规格。
2 B 模具
3 Part B
4 Part A
|
1 一般属性:这些不能被视为规格。
2 B 模具
3 Part B
4 Part A
|
价格走势对比图
硅橡胶,LSR Silopren® LSR 4660
硅橡胶,LSR Silopren® LSR 2671
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交