PC，LNP™ LUBRICOMP™ DL003EXJ compound对比PC，LNP™ LUBRICOMP™ DP003EH compound物性表,价格行情_搜料

牌号信息	LNP™ LUBRICOMP™ DL003EXJ compound 物性表 PC & 沙特沙伯基础指导价格：暂无塑料库存：缺货	LNP™ LUBRICOMP™ DP003EH compound 物性表 PC & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	LNPLubricompDL003EXJ是一种基于聚碳酸酯的化合物，含有15%的聚四氟乙烯。这一级别的特点是容易成型，低可提取，耐磨，保健。也称为：lnplubricomp化合物dl-4030 em le hc产品再订购名称：dl003exj LNP* LUBRICOMP* DL003EXJ is a compound based on Polycarbonate containing 15% PTFE. Characteristics of this grade are Easy Molding, Low Extractable, Wear Resistant, Healthcare.	LNP Lubricomp DP003eh化合物LNPLubricompDP003eh是一种基于聚碳酸酯树脂的化合物，含有15%的聚四氟乙烯/硅酮。这种材料的附加功能包括：容易成型，耐磨，保健。也被称为：lnplubricomp化合物dl-4530 em hc产品重新订购名称：dp003eh lnp lubricomp dp003eh化合物lnp lubricompdp003eh是一种基于聚碳酸酯树脂的化合物，含有硅、聚四氟乙烯。这种材料的附加特性包括：容易成型。也称为：lnplubricomp化合物dl-4530 em hc产品再订购名称：dp003eh LNP™ LUBRICOMP™ DP003EH compound LNP LUBRICOMP* DP003EH is a compound based on Polycarbonate resin containing 15% PTFE/Silicone. Added features of this material include: Easy Molding, Wear Resistant, Healthcare. Also known as: LNP* LUBRICOMP* Compound DL-4530 EM HC Product reorder name: DP003EH LNP™ LUBRICOMP™ DP003EH compound LNP LUBRICOMP* DP003EH is a compound based on Polycarbonate resin containing Silicone, PTFE. Added features of this material include: Easy Molding. Also known as: LNP* LUBRICOMP* Compound DL-4530 EM HC Product reorder name: DP003EH

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	PC Polycarbonate	PC Polycarbonate
填料：	PTFE 15	PTFE 15
用途：	医疗/护理用品	医疗/护理用品
性能特点：	易加工,低萃取物,润滑性,耐磨 Excellent Processability,Low extract,Lubricating,Good wear resistance	易加工,润滑性,耐磨 Excellent Processability,Lubricating,Good wear resistance
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL LNP™ LUBRICOMP™ DL003EXJ compound LNP™ LUBRICOMP™ DP003EH compound 单位
UNIT 测试方法
TEST METHOD

吸水率(24hr，50% RH)
Water absorption rate % ASTM D570

吸水率(平衡，23℃，50% RH)
Water absorption rate % ISO 62

密度
Density g/cm³ ASTM D792

收缩率(MD：24 hrs)
Shrinkage rate % ASTM D955

收缩率(TD：24 hrs)
Shrinkage rate % ASTM D955

机械性能
MECHANICAL LNP™ LUBRICOMP™ DL003EXJ compound LNP™ LUBRICOMP™ DP003EH compound 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa ASTM D790

弯曲强度
bending strength MPa ISO 178

弯曲模量
Bending modulus MPa ISO 178

弯曲模量(--)
Bending modulus MPa ASTM D790

弯曲模量(50 mm跨距)
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(屈服)
Tensile strain % ISO 527-2/5

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ISO 527-2/5

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸强度(屈服)
tensile strength MPa ISO 527-2/5

拉伸强度(断裂)
tensile strength MPa ASTM D638

拉伸强度(断裂)
tensile strength MPa ISO 527-2/5

拉伸模量
Tensile modulus MPa ASTM D638

拉伸模量
Tensile modulus MPa ISO 527-1-2

摩擦系数(动态)
friction coefficient ASTM D3702 Modified

摩擦系数(静态)
friction coefficient ASTM D3702 Modified

磨损因数(Ring)
Wear factor 10^-10 in^5-min/ft-lb-hr ASTM D3702 Modified

磨损因数(Washer)
Wear factor 10^-10 in^5-min/ft-lb-hr ASTM D3702 Modified

冲击性能
IMPACT LNP™ LUBRICOMP™ DL003EXJ compound LNP™ LUBRICOMP™ DP003EH compound 单位
UNIT 测试方法
TEST METHOD

多轴向仪器化冲击能量
Multi axial instrumented impact energy J ISO 6603-2

悬臂梁无缺口冲击强度(23℃)
Notched impact strength of cantilever beam kJ/m² ISO 180/1U

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D4812

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch kJ/m² ISO 180-1A

装有测量仪表的落镖冲击(23℃，Total Energy)
Dart impact equipped with measuring instruments J ASTM D3763

热性能
THERMAL LNP™ LUBRICOMP™ DL003EXJ compound LNP™ LUBRICOMP™ DP003EH compound 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火，3.2 mm)
Hot deformation temperature ℃ ASTM D648

热变形温度(0.45 MPa，未退火，64 mm跨距)
Hot deformation temperature ℃ ISO 75-2/Bf

热变形温度(1.8 MPa，未退火，3.2 mm)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火，64 mm跨距)
Hot deformation temperature ℃ ISO 75-2/Af

线性热膨胀系数(MD：-30~30℃)
Linear coefficient of thermal expansion 1/℃ ASTM D696

线性热膨胀系数(TD：-30~30℃)
Linear coefficient of thermal expansion 1/℃ ASTM D696

加工方式

注射 LNP™ LUBRICOMP™ DL003EXJ compound LNP™ LUBRICOMP™ DP003EH compound 单位测试方法

加工熔体温度 °C

干燥时间 hr

干燥温度 °C

建议的最大水分含量 %

料筒中部温度 °C

料筒前部温度 °C

料筒后部温度 °C

模具温度 °C

背压 MPa

螺杆转速 rpm

备注

1 一般属性：这些不能被视为规格。

2 2.0 in/min

3 类型 1, 0.20 in/min

4 0.051 in/min

5 0.079 in/min

6 80*10*4

7 80*10*4 mm