3D打印材料，Lusin® Lub O 32 F对比3D打印材料，WaterClear Ultra 10122物性表,价格行情_搜料

牌号信息	Lusin® Lub O 32 F 物性表 3D打印材料 & 美国肯天指导价格：暂无塑料库存：缺货	WaterClear Ultra 10122 物性表 3D打印材料 & 帝斯曼指导价格：暂无塑料库存：缺货
牌号简介	具有100%活性成分的润滑剂和释放剂有利于溶剂和无硅环保100%活性成分。配方符合21 CFR§178.3570“附带食品接触的润滑剂”的要求。根据21 CFR§175.300，产品可用作树脂和聚合物涂层。配方为：n符合第10/2011号欧洲塑料法规的一般说明Lusin® Lub O 32 F可在包装行业用作润滑剂或脱模剂。如果产品应用在模具上，例如在吹塑薄膜应用中，它可以减少生产过程中的堆积。Lusin® Lub O 32 F，适用于PET预制件的外表面，显著减少运输和搬运过程中塑料表面的划痕。通过在瓶坯或最终瓶身上涂Lusin® Lub O 32 F涂层，可以将使用空气传送机运输过程中的瓶子堵塞降至绝对最小。应用在PET预成型件的外表面润滑方面，Lusin® Lub O 32 F应使用合适的喷涂设备，如StIDLE设备。该产品也适用于热塑性塑料加工行业中的脱模剂。注塑模具温度不得超过200°C。对于薄膜应用，模具温度不应超过190°C。Lusin® Lub O 32 F是无水系统。因此，我们强烈建议不要用水稀释，因为机器中，尤其是管道中的水即使是很小的杂质也会导致可能堵塞系统的结块。 Lubricant and Release Agent with 100% Active Ingredient Benefits Solvent and silicone free Environmentally friendly 100% active ingredient The formulation meets the requirements of 21 CFR §178.3570 "lubricants with incidental food contact" According to 21 CFR §175.300 the product can be used as resinous and polymeric coating The formulation is in compliance with European Plastics Regulation No 10/2011 Description In general Lusin® Lub O 32 F can be used as lubricant or release agent in the packaging industry. If the product is applied on a die, e. g. in blown film applications, it reduces the build up during production. Lusin® Lub O 32 F, applied to the outside surface of PET preforms significantly reduces scratches to the plastic surfaces occurring during transport and handling. The blocking of bottles during the transport using air conveyors can be reduced to an absolute minimum by means of coating the preforms or the final bottles with Lusin® Lub O 32 F. Application In terms of lubrication of the outside surface of PET preforms, Lusin® Lub O 32 F should be applied using a suitable spray equipment, e.g. Steidle equipment. The product is also suitable as a release agent in the thermoplastic processing industry. Mould temperatures should not exceed 200°C in terms of injection moulding. For film applications the die temperature should not exceed 190°C. Lusin® Lub O 32 F is a waterless system. Therefore we strongly advise against dilution with water since even small impurities of water in the machinery and especially in the tubes will cause agglomerates that may block the system.	DSM的索莫斯WaterClear Ultra 10122是一种新一代光学透明树脂，具有类似ABS的性能和良好的耐温性。它生产无色，功能性，精确的部件，模拟亚克力的外观。基于Oxetane的优点，这些部件也比原来的Somos Waterlear 10120树脂具有更好的耐水性。Somos Waterlear Ultra是一种快速、低粘度的通用树脂。应用这种耐高温的，类似于ABS的光聚合物被用于固体成像过程，如立体光刻，以构建三维零件。Somos Waterclear Ultra非常适合需要光学清晰度的应用，如汽车镜片、瓶子、流体流动分析、包装原型、光管等。Somos Waterlear Ultra还可用于概念、功能模型和主模式。 DSM's Somos® WaterClear Ultra 10122 is a next generation optically clear resin with ABS-like properties and good temperature resistance. It produces colorless, functional, accurate parts that simulate an acrylic appearance. Based on the Oxetane Advantage™, the parts also have improved water- resistance over the original Somos® WaterClear 10120 resin. Somos® WaterClear Ultra is a fast, low viscosity, general-purpose resin. Applications This high-temperature resistant, ABS-like photopolymer is used in solid imaging processes, like stereolithography, to build three-dimensional parts. Somos® WaterClear Ultra is ideal for applications requiring optical clarity, such as automotive lenses, bottles, fluid flow analysis, packaging prototypes, light pipes and more. Somos® WaterClear Ultra can also be used for concept, functional models and master patterns.

产品描述
厂家：	美国肯天 Chem-Trend	帝斯曼 DSM
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：		工程配件,电器外壳,镜头,管道系统,包装,瓶子,汽车领域的应用,成型材料
性能特点：		透光性好,高纯度,低粘度,光学性能,耐高温 Good Clarity,High purity,Low Viscosity,Optical performance,High Heat Resistance
加工条件：		立体光刻

技术参数

物理性能
PHYSICAL Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

吸水率(平衡)
Water absorption rate % ASTM D570

密度
Density g/cm³

粘度
viscosity Pa·s

粘度(30℃)
viscosity Pa·s

冲击性能
IMPACT Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度
Impact strength of cantilever beam notch J/m ASTM D256-A

热性能
THERMAL Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

玻璃化转变温度
Glass transition temperature ℃ ASTM E1545

线性热膨胀系数(-40 到 0℃)
Linear coefficient of thermal expansion cm/cm/℃ ASTM E831

线性热膨胀系数(0 到 50℃)
Linear coefficient of thermal expansion cm/cm/℃ ASTM E831

线性热膨胀系数(100 到 150℃)
Linear coefficient of thermal expansion cm/cm/℃ ASTM E831

线性热膨胀系数(50 到 100℃)
Linear coefficient of thermal expansion cm/cm/℃ ASTM E831

线性热膨胀系数(MD)
Linear coefficient of thermal expansion ASTM E831

电气性能
ELECTRICAL Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

介电常数(1 kHz)
Dielectric constant ASTM D150

介电常数(1 MHz)
Dielectric constant ASTM D150

介电常数(60 Hz)
Dielectric constant ASTM D150

介电强度
Dielectric strength kV/mm ASTM D149

光学性能
OPTICAL Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

折射率
Refractive index ASTM D542

补充信息
Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

Critical Exposure
Critical Exposure mJ/cm²

渗透深度
Penetration depth µm

机械性能
MECHANICAL Lusin® Lub O 32 F WaterClear Ultra 10122 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(断裂)
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ASTM D638

泊松比
Poisson's ratio ASTM D638

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

备注

1 一般属性：这些不能被视为规格。

2 with Thermal Postcure


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
光学性能
补充信息
机械性能
加工方式
备注
返回顶部

3D打印材料，Lusin® Lub O 32 F对比3D打印材料，WaterClear Ultra 10122对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别