牌号简介 About |
---|
SP-6340是一种硬质注塑聚氯乙烯复合材料,用于要求最大爆裂强度的内部配件和类似配置的零件。SP-6340非常适合大直径管件。SP-6340符合国家自然科学基金14号标准,符合61号标准健康效应要求。 SP-6340 is a rigid injection molding PVC compound for interior fittings and parts of similar configuration where maximum burst strength is required. SP-6340 is ideally suited for large diameter fittings. SP-6340 is listed with NSF under Standard 14, and meets Standard 61 health effects requirements. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.36 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20-0.40 | % | ASTM D995 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
74.00 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
70.0 | ℃ | ASTM D648 |
其他性能 Other performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
38 | % | ASTM D2863 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
R 级 | ASTM D785 | |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
|||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
加德纳冲击 Gardner impact |
J | ||
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Distance/Wall Thickness |
3 程序 A, C 1/2" R Tup |
【新闻资讯】查看全部
巴斯夫技术可于较低温度在柔性膜上实现半导体电路制作
2021-03-20 搜料网资讯: 早前,韩国显示配件及传感器行业的领先企业 CLAP与全球化工公司巴斯夫 (BASF) 在韩国首尔签订 Organic Semiconductor InkSet 技术转让合同。 继19年6月与巴斯夫(BASF)签订液晶材料 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |