牌号简介 About |
---|
Sarlink TPV 3100系列是主要为通用、汽车和工业应用设计的工程材料,需要良好的热、机械和物理性能平衡。sarlink 3139D是一种硬硬度、低密度、多用途热塑性硫化胶,可通过注射成型、吹塑或挤出加工,适用于夹持器、密封件、垫圈、型材、软管和管、波纹管和其他物品。 SARLINK® TPV 3100 series are engineered materials designed primarily for general purpose, automotive and industrial applications requiring a good balance of thermal, mechanical, and physical properties. SARLINK® 3139D, available in NAT and BLK, is a hard hardness, low density, multi-purpose thermoplastic vulcanizate that can be processed by injection molding, blow molding or extrusion for applications such as grips, seals, gaskets, profiles, hose & tubes, bellows, and other articles. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- |
0.938 | g/cm³ | ASTM D792 |
-- -- |
0.940 | g/cm³ | ISO 1183 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,5 秒,挤出成型 Shore D, 5 seconds, extrusion molding |
38 | ||
邵氏 D,5 秒,注塑成型 Shore D, 5 seconds, injection molding |
41 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
TD,100% 应变 TD, 100% strain |
8.89 | MPa | ASTM D412 |
MD,100% 应变 MD, 100% strain |
MPa | ASTM D412 | |
TD,100% 应变 TD, 100% strain |
MPa | ISO 37 | |
拉伸强度 tensile strength |
|||
TD,断裂 TD, fracture |
MPa | ||
MD,断裂 MD, fracture |
MPa | ||
拉伸应变 Tensile strain |
|||
TD,断裂 TD, fracture |
% | ||
流量,断裂 Flow rate, fracture |
% | ||
撕裂强度 tear strength |
|||
TD TD |
kN/m | ASTM D624 | |
TD TD 3 |
kN/m | ISO 34-1 | |
压缩形变 Compression deformation |
|||
23℃,22 hr 23℃,22 hr |
% | ||
70℃,22 hr 70℃,22 hr |
% | ||
125℃,70 hr 125℃,70 hr |
% | ||
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 - TD Change rate of tensile strength in air - TD |
|||
135℃,1000 hr 135℃,1000 hr |
% | ASTM D573 | |
100% 应变,135℃,1000 hr 100% strain, 135 ℃, 1000 hr |
% | ASTM D573 | |
150℃,168 hr 150℃,168 hr |
% | ASTM D573 | |
100% 应变,150℃,168 hr 100% strain, 150 ℃, 168 hr |
% | ASTM D573 | |
100% 应变 135℃,1000 hr 100% strain 135 ℃, 1000 hr |
% | ISO 188 | |
100% 应变 150℃,168 hr 100% strain 150 ℃, 168 hr |
% | ISO 188 | |
空气中极限伸长率的变化率 - TD Change rate of ultimate elongation in air - TD |
|||
135℃,1000 hr 135℃,1000 hr |
% | ASTM D573 | |
150℃,168 hr 150℃,168 hr |
% | ASTM D573 | |
135℃,1000 hr 135℃,1000 hr |
% | ISO 188 | |
150℃,168 hr 150℃,168 hr |
% | ISO 188 | |
空气中硬度计硬度的变化率 The rate of change in hardness of a hardness tester in the air |
|||
支撐 D,135℃,1000 hr Support D, 135 ℃, 1000 hr |
|||
支撐 D,150℃,168 hr Support D, 150 ℃, 168 hr |
|||
体积变化 Volume change |
|||
125℃,70 hr,在IRM 903油中 125 ℃, 70 hr, in IRM 903 oil |
% | ASTM D471 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相对温度指数 Relative temperature index |
℃ | UL 746 | |
电气性能 Electrical performance |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.50 mm,所有颜色 1.50 mm, all colors |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体表观粘度 - Capillary,@ 206/s Apparent viscosity of melt - Capillary, @ 206/s |
|||
200℃ 200℃ |
Pa·s | ASTM D3835 | |
200℃ 200℃ |
Pa·s | ISO 11443 | |
法律声明 Legal Statement |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
备注 |
---|
3、B 方法,直角形试样(不割口) |
【新闻资讯】查看全部
赚女性的钱还侮辱女性?宝洁中国致歉,旗下产品还要涨价
2022-03-25 继去年末的召回风波后,全球日化巨头美国宝洁公司(NYSE:PG)再次陷入舆论中。 3月24日上午,据网友爆料,3月13日,宝洁会员中心公众号发布了一篇《女人脚臭是男人的5倍,不信闻一 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |