牌号简介 About |
---|
Nycast 12由Cast Nylons有限公司制造,是北美唯一的铸造尼龙12材料。NYCAST 12为工程师们提供了来自NYCAST高级铸造尼龙系列的另一个优越选择。Nycast 12是专门为以下产品而设计的:非常低的吸湿性、优异的耐磨性、尺寸稳定性、卓越的润滑能力、突出的机械特性、高冲击强度、较低的热膨胀。典型应用包括:车轮、滚子、轴承和衬套、齿轮、阀门密封件、Nycast 12。适用于:动力传动游乐园、阀门和密封件制造商、食品加工船等行业 With its extremely low moisture absorption, the mechanical properties of NYCAST 12 remain virtually unaffected in a wide range of environments. NYCAST 12 offers superior performance in applications where dimensional stability, chemical resistance, dielectrics, abrasion resistance and impact strength are important factors. In wet or dry environments, indoor or outdoor, the low deformation and superior fatigue resistance properties of NYCAST 12 delivers unmatched performance in many high-speed wheel and roller applications. This material is also well suited to use for power transmission components in material handling and transportation environments, as well as in structural and enclosure elements in sensitive electronic and manufacturing equipment. CAST NYLONS LIMITED is the only producer of cast nylon 12 in North America. High impact resistance Low moisture absorption Excellent chemical resistance Low creep factor Excellent dimensional stability |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.03 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
ASTM D570 | ||
24hr 24hr |
0.10 | % | ASTM D570 |
饱和 saturated |
0.70 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
160 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
173 到 177 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
连续使用温度 Continuous use temperature |
℃ | ASTM D794 | |
熔融温度 Melting temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
使用温度 Operating temperature |
|||
Intermittent Intermittent |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 kHz 1 kHz |
ASTM D150 | ||
100 kHz 100 kHz |
ASTM D150 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
剪切强度 shear strength |
MPa | ASTM D732 | |
摩擦系数 friction coefficient |
|||
与自身 - 动态 With oneself - dynamic |
ASTM D1894 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
加快制定出台防治塑料垃圾污染政策
2018-03-14 住闽全国政协委员陈建华提交提案,建议加快制定出台防治塑料垃圾污染的政策,使“白色污染”治理有步骤、有目标、有期限地稳妥展开。 提案指出,当前我国在防治塑料垃圾污染方面还存在突出问题,包括:没有针对性法律法规来约束公民和生产企业的行为;缺少相关经济政策引导,无法调动企业回收、加工、利用废旧塑料制品的积极性;各部门管理工作不到位,对经营活动中产生的废旧塑料制品未采取严格管理措施;以填埋作业、焚烧为主的塑料垃圾处理方式亟待改进;公民的环保意识有待提高等。 对此,提 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |