牌号简介 About |
---|
属性:弹性体TPV是一种热塑性弹性体含有完全硫化的EPDM橡胶。即使在高达135°C(275F)的高温下,它也是要求长期密封性能的应用的理想解决方案。可以使用传统的热塑性加工设备进行加工。适用于注塑、吹塑、型材和板材挤出应用。Elastoprene TPV提供耐候(紫外线稳定)黑色。Elastoprene TPV符合FDA、CFR第21篇第177.2600节“重复使用的橡胶制品”;以及177.1210“食品容器用带密封垫圈的封口”。应用:弹性烯是一种成本效益的解决方案,可替代桑托普林橡胶、苯乙烯基TPE和热固性橡胶,如EPDM和氯丁橡胶。它是在以下市场中需要灵活性的应用的最佳选择:汽车零件、电器、商用机器、建筑、消费品和电子产品。 Attributes: Elastoprene TPV is a thermoplastic elastomer containing fully vulcanized EPDM rubber. It is ideal solution for applications requiring long term sealing performance even at elevated temperatures up to 135°C (275F). Can be processed using conventional thermoplastic processing equipment. Suitable for injection molding, blow molding, profile and sheet extrusion applications. Elastoprene TPV is supplied in weatherable (UV stabilized) black. Elastoprene TPV is in compliance with FDA, CFR title 21 Section 177.2600 "Rubber articles intended for repeated use"; and 177.1210 "Closures with sealing Gaskets for food Containers". Applications: Elastoprene is a cost effective solution for replacing Santoprene rubber, styrenic-based TPEs, and thermoset rubbers such as EPDM, and Polychloroprene. It is an excellent choice for applications requiring flexibility in the following markets: automotive parts, appliance, business machines, construction, consumer products, and electronics. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.960 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate 3 |
|||
230℃,10.0kg 230℃,10.0kg 3 |
8.0 到 15 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 A,5 秒 Shore A, 5 seconds |
55 | ASTM D2240 | |
邵氏 A,15 秒 Shore A, 15 seconds |
52 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 4 |
|||
屈服,23℃ Yield, 23 ℃ 4 |
6.20 | MPa | ASTM D412 |
100% 应变,23℃ 100% strain, 23 ℃ 4 |
MPa | ASTM D412 | |
拉伸应变 Tensile strain 4 |
|||
断裂,23℃ Fracture, 23 ℃ 4 |
% | ASTM D412 | |
撕裂强度 tear strength 5 |
|||
23℃ 23℃ 5 |
kN/m | ASTM D624 | |
压缩形变 Compression deformation |
ASTM D395 | ||
70℃,22 hr 70℃,22 hr |
% | ASTM D395 | |
125℃,70 hr 125℃,70 hr |
% | ASTM D395 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
熔融温度 Melting temperature |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐臭氧性 Ozone resistance 6 |
ASTM D1149 |
备注 |
---|
2 EPDM |
3 程序 A |
4 500 mm/min |
5 C 模具, 500 mm/min |
6 500 hr, 100 pphm O3 conc. |
【新闻资讯】查看全部
一次性塑料杯不达标!定远县鑫磊:全部召回并免费更换
2018-06-27 日前,定远县鑫磊纸塑包装有限公司向安徽省质量技术监督局、滁州市质量技术监督局备案了召回计划,将自2018年6月22日起,召回2018年5月28日至6月4日期间生产的一次性塑料杯,型号为36*60,数量约2875200只。 本次召回的产品为一次性塑料杯,产品负重性能不达标,该项目不合格反映塑料杯材质较软,难以拿捏,在使用中会严重变形,如果盛装热水,可能会造成烫伤。定远县鑫磊纸塑包装有限公司将免费为客户更换符合要求的塑料杯,以消除安全隐患。 定远县鑫磊纸塑包装有 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |