牌号简介 About |
---|
ETP聚合物该过氧化固化化合物基于乙烯、四氟乙烯(TFE)和全氟甲基乙烯基醚(PMVE)的四聚体和固化部位单体-70-80°IRHD。这种化合物比氟橡胶具有更高的抗流体性。它不是完全全氟的,因此不会出现与Perlast全氟弹性体相关的超低体积膨胀。它特别适用于与强胺、碱、蒸汽和极性溶剂接触的应用。它提高了AFLA和FKM弹性体的耐化学性,同时保持了优异的低温性能。 ETP polymer. This peroxide cured compound is based on a tetrapolymer of Ethylene, Tetrafluoroethylene (TFE) and Perfluoromethylvinylether (PMVE), and a cure site monomer - 70-80 °IRHD. This compound offers a higher level of fluid resistance than that of fluoroelastomers. It is not totally perfluorinated, so will not exhibit the ultra-low volume swell associated with Perlast® perfluoroelastomers. It is particularly suited to applications which have contact with strong amines, bases, steam and polar solvents. It improves on the chemical resistance of Aflas® and FKM elastomers, while retaining excellent low temperature performance. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
IRHD 硬度 IRHD hardness |
75 | ASTM D1415 , ISO 48 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
18.4 | MPa | ASTM D412 , ISO 37 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
180 | % | ASTM D412,ISO 37 |
压缩形变 Compression deformation |
|||
200℃,24 hr 200℃,24 hr |
20 | % | ASTM D395,ISO 815 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
最高工作温度 Maximum operating temperature |
206 | ℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
新项目!湛新在奥地利投资数百万欧元开设全新研发中心
2022-10-26 扫描上图二维码,可以免费下载 搜料 APP 湛新宣布在奥地利Werndorf开设一个新的最先进的研发中心。该项目是湛新战略计划的重要组成部分,旨在引领行业发展可持续的、环境友好型树 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |