公司信息及水印
牌号简介 About |
---|
Versaflex™ CL2250 是容易加工的复合材料,设计用于要求符合 FDA 标准、透明度和耐热性高的注射成型应用。 透明度极高 可以重叠模塑方式粘接在聚丙烯上 优异的着色性 耐热性和耐蒸煮性非常好 Versaflex™ CL2250 is an easy processing compound designed for use in injection molding applications where FDA compliance, clarity and enhanced heat resistance are required. Excellent Clarity Overmold Adhesion to Polypropylene Superior Colorability Very Good Heat and Boil Resistance |
技术参数 Technical Data | |||
---|---|---|---|
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 4 , 5 |
ASTM D412 | ||
断裂,23℃ Fracture, 23 ℃ 4 , 5 |
5.70 | MPa | ASTM D412 |
100% 应变,23℃ 100% strain, 23 ℃ |
1.52 | MPa | ASTM D412 |
300% 应变,23℃ 300% Strain, 73°F |
2.32 | MPa | ASTM D412 |
拉伸应变 Tensile strain 4 , 5 |
|||
断裂,23℃ Fracture, 23 ℃ 4 , 5 |
770 | % | ASTM D412 |
撕裂强度 tear strength |
24.5 | kN/m | ASTM D624 |
压缩形变 Compression deformation |
|||
23℃,22 hr 23℃,22 hr |
% | ASTM D395B | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
ASTM D2240 | ||
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
g/10min | ASTM D1238 | |
收缩率 Shrinkage rate |
|||
MD MD |
% | ASTM D955 | |
熔体表观粘度 Apparent viscosity of melt |
|||
200℃,11200 sec^-1 200℃,11200 sec^-1 |
Pa·s | ASTM D3835 |
备注 |
---|
1 Please contact GLS Thermoplastic Elastomers for a copy of the FDA compliance letter. |
2 Please contact PolyOne GLS Thermoplastic Elastomers for a complete copy of the GLS Healthcare Policy. 1. The Customer must notify GLS of any FDA Class I and/or European Union Class I medical devices for each specific product and application. 2. The Customer shall not knowingly manufacture, use, sell or otherwise supply, directly or indirectly products or compounds made from GLS products in any of the following without prior written approval by GLS for each specific product or application: a. Cosmetics b. Drugs and other Pharmaceuticals c. Temporary or permanent implantation in the human body, regardless of the intended duration of implantation d. Class II and Class III Medical Devices as defined in 21 CFR 860.3 ("Medical Devices") e. Class IIa, IIb and III as defined in Directive 93/42/EEC |
3 一般属性:这些不能被视为规格。 |
4 C 模具 |
5 2 小时 |
【新闻资讯】查看全部
福斯特将AdvanSource生物材料的TPU添加到医疗产品组合中
2022-05-26 福斯特将为北美医疗市场的热塑性聚氨酯(TPU)产品提供应用开发、销售和技术支持。 近日,福斯特公司宣布正式成为总部位于马萨诸塞州威尔明顿的AdvanSource Biomaterials生物材料的营销 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |