牌号简介 About |
---|
聚苯乙烯晶体1340是一种高分子量的晶体聚苯乙烯,允许高冲击聚苯乙烯(如聚苯乙烯冲击7240)的最大稀释率。在稀释过程中,聚苯乙烯晶体1340在挤出和热成型过程中都具有良好的加工性能,具有良好的成品尺寸稳定性和机械性能。聚苯乙烯晶体1340可用于注射。应用杯子和其他产品,通过在线挤压/热成型,通过直接气体发泡托盘(在线热成型),奶制品床单,CD盒,玩具,办公设备,鸡蛋盒。 POLYSTYRENE CRYSTAL 1340 is a high molecular weight crystal polystyrene which allows maximum dilution rates with high impact polystyrene grades such as POLYSTYRENE IMPACT 7240. In dilution, POLYSTYRENE CRYSTAL 1340 gives excellent processing in both extrusion and thermoforming with good finished product dimensional stability and mechanical properties. POLYSTYRENE CRYSTAL 1340 can be used in injection. Applications Cups and other products by in line extrusion / thermoforming, foamed trays by direct gassing (in line thermoforming), dairy sheets, CD boxes, toys, office equipment, eggs boxes. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.60 | g/cm³ | |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
4.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
0.40 到 0.70 | % | |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
< 0.10 | % | ISO 62 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ISO 75-2/A | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
B50 B50 |
℃ | ISO 306 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
L 级 Level L |
ISO 2039-2 | ||
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
润丰股份深交所创业板上市
2021-08-08 搜料网资讯: 7月28日,山东潍坊润丰化工股份有限公司(简称润丰股份)在深交所创业板上市。润丰股份本次公开发行股票6905万股,占发行后总股本的25%,发行价格为22.04元/股。 据了解, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |