牌号简介 About |
---|
产品说明酚醛模塑料,无组织/有机填充,石墨改性,导热性好,滑动性能好,导电性在电气性能应用领域,砂轮中心轴承,煤气表零件,泵零件,滑动/导向元件,滑动轴承零件 Product Description Phenolic moulding compound, inorganically/organically filled, modified with graphite, good heat conductivity, good sliding properties, conductive in electrical properties Application Areas modified with graphite, good heat conductivity, good sliding properties, high dimension stability, gas meter parts, fuel pump impellers, bearing parts, gas meter valves and grids |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.59 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.85 | g/cm³ | ISO 60 |
收缩率 Shrinkage rate |
ISO 2577 | ||
-- -- 2 |
0.25 | % | ISO 2577 |
-- -- 3 |
0.20 | % | ISO 2577 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
6.0 | mg | ISO 62 |
后收缩 Post contraction |
ISO 2577 | ||
-- -- 3 |
% | ISO 2577 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
8.0 MPa,未退火 8.0 MPa, unannealed |
℃ | ISO 75-2/C | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩成型压力 Compression molding pressure |
MPa | ||
压缩成型温度 Compression molding temperature |
℃ | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
球压硬度 Ball hardness |
|||
H 961/30 H 961/30 |
MPa | ISO 2039-1 | |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
MPa | ISO 527-2/5 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength 4 |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Compression |
3 Injection |
4 0.079 in/min |
【新闻资讯】查看全部
美国复合材料JM生产商推出再生碳纤维增强尼龙6
2018-05-28 塑料工程师协会SPE是世界上最大的、知名度最高的塑料行业协会,他们组织的第十三届汽车工程塑料会议(AutoEPCON)于4月30日到5月1日在底特律郊区举行。其中,一个芝加哥定制复合材料经销商JM聚合物公司, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |