牌号简介 About |
---|
EP 548S是一种高流动性的异相共聚物,具有很高的刚性和抗平均冲击能力。由于其良好的感官特性,建议用于需要低气味和味道转移的食品包装。应用:玩具注塑成型,薄壁刚性容器,家用电器等。加工:注塑 EP 548S is a heterophasic copolymer of high fluidity, which provides high rigidity and resistance to the average impact. Due to its good organoleptic properties, it is recommended for use in packaging of food products that require low transfer of odor and taste. Applications: Injection Molding of toys, thin-walled rigid containers, home utilities and others. Processing: Injection Molding |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.903 | g/cm³ | ASTM D792 |
密度 Density |
0.903 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
44 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃,注塑成型 -20 ℃, injection molding |
35 | J/m | ASTM D256 |
23℃,注塑成型 23 ℃, injection molding |
60 | J/m | ASTM D256 |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
-20℃,注塑成型 -20 ℃, injection molding |
kJ/m² | ISO 180 | |
23℃,注塑成型 23 ℃, injection molding |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 3 | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,注塑成型 Shaw's D, injection molding |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ISO 527-2 | |
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ISO 527-2 | |
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,注塑成型 1% cut, injection molding |
MPa | ASTM D790 | |
1% 正割,注塑成型 1% cut, injection molding |
MPa | ISO 178 | |
洛氏硬度 Rockwell hardness 2 |
|||
R 级 R-level 2 |
ISO 2039-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
【新闻资讯】查看全部
美国政府如何治理塑料污染
2022-03-25 为同其他国家和利益相关者共同启动一个抗击塑料污染的进程,美国已经在国内外采取行动,以解决这一全球性挑战。 解决塑料污染有关的关键性项目如下: 01 美国国家环境保护局( |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |