牌号简介 About |
---|
Kraton D1157A是一种以苯乙烯和丁二烯为基础的透明线性嵌段共聚物,结合苯乙烯的质量为29.5%。它是从欧洲以物理形式供应的,在等级命名法中确定如下:Kraton D1157 AS-以多孔颗粒形式供应,多孔颗粒上撒有无定形硅石Kraton D1157 AT-以多孔颗粒形式供应,多孔颗粒上撒有滑石Kraton D1157 ATM-以粉末形式供应,滑石粉撒在北美市场,Kraton D1157 A用作M。沥青或热塑性塑料的改性剂和复合配方。它也可以作为配方粘合剂、密封剂和涂层的一种成分。 Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AS - supplied as porous pellets dusted with amorphous silica Kraton D1157 AT - supplied as porous pellets dusted with talcum Kraton D1157 ATM - supplied as powder dusted with talcum for the North American market Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.938 | g/cm³ | ISO 2781 |
表观密度 Apparent density |
0.40 | g/cm³ | ASTM D1895B |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
3.5 到 6.5 | g/10min | ISO 1133 |
溶液粘度 Solution viscosity 2 |
1300 到 1900 | mPa·s | 内部方法 |
聚苯乙烯含量 Polystyrene content |
29 到 31 | % | 内部方法 |
Total Extractables Total Extractables |
% | 内部方法 | |
灰份含量 Ash Content |
|||
AS,AT AS,AT |
% | ISO 247 | |
ATM ATM |
% | 内部方法 | |
|
% | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,15 秒,模压成型 Shore A, 15 seconds, molded |
ASTM D2240 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 37 | |
300% 应变 300% strain |
MPa | ISO 37 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 37 |
备注 |
---|
2、25%w toluene solution at 25°C |
【新闻资讯】查看全部
焊接技术用于热塑性复合资料
2016-09-19 AGC公司发明了一种低成本热塑性复合材料的焊接技术。该技术所用设备和材料比较低廉,而且焊接结构强度高,刚度好,抗疲劳性能好。 AGC是一家为航空航天和国防提供飞机结构构件、组件及装配的供应商。最近,AGC公司成功地发明了一种应用于热塑性复合材料的低成本焊接技术。 国家航空航天技术开发项目,英国皇家复合材料研究中心,TenCate先进复合材料以及劳斯莱斯公司共同资助了‘CoFusion’项目。该项目证实,碳/聚 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |