牌号简介 About |
---|
自由形式的栖息地黑色环氧腻子是一种手工混合腻子,用于创建纹理或高度详细的显示件。生境黑无溶剂,不含VOC。工作时间为60分钟,室温(73°F/23°C)下固化时间为16小时。环氧树脂能固化成一种非常坚硬、耐热、容易上漆的材料。与生境黑色折叠粉一起使用-将粉末折叠成环氧腻子,使其变厚,并在垂直表面上减少下垂。折叠粉还减少了粘性,使环氧树脂更易于处理。黑色生境适合室内和室外使用。它被认证为“水族馆安全”,被水族馆用来制作超现实的珊瑚和其他水族馆展示。Habitat Black还用于一般的雕刻和主题化应用。一旦腻子被应用,它可以被压印一个硅橡胶图章,以创造重复的模式和复杂的细节在一个大的表面积。表面可以用酒精或水弄平。新生境黑色将结合到治愈生境黑色没有分层。生境黑色不会融化泡沫,并可作为EPS泡沫涂料使用。自由形式的生境黑也是一种极好的修补水泥,永久性地与自身,聚氯乙烯,有机玻璃(丙烯酸),木材,许多金属,塑料和泡沫结合。 Free Form® Habitat® Black Epoxy Putty is a mix-by-hand putty that is used to create textured or highly detailed display pieces. Habitat® Black is solvent-free and contains no VOC's. Working time is 60 minutes and cure time is 16 hours at room temperature (73°F/23°C). Epoxy cures to a very hard, heat resistant material that is easily painted. Use with Habitat® Black Folding Powder - fold powder into epoxy putty to thicken and reduce sag when applied to a vertical surface. Folding Powder also reduces stickiness and makes the epoxy more handle-able. Habitat® Black is suitable for interior and exterior use. It is certified ‘aquarium safe' and used by aquariums to create hyper-realistic coral and other aquarium displays. Habitat® Black is also used for general sculpting and theming applications. Once putty is applied, it can be stamped with a silicone rubber stamp to create repeating patterns with intricate detail over a large surface area. Surface can be smoothed with alcohol or water. New Habitat® Black will bond to cured Habitat® Black without delamination. Habitat® Black will not melt foam, and can be used as an EPS foam coating. Free Form® Habitat® Black is also an excellent repair cement and bonds permanently to itself, PVC, Plexiglas® (acrylic), wood, many metals, plastics and foams. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.60 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.625 | cm³/g | ASTM D1475 |
粘度 viscosity |
Dough | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Flame Resistance Flame Resistance |
E84, Class A | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
16.0 | hr | |
混合比 Mixing ratio |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
室温固化 Room temperature curing 2 |
℃ | ||
热固化 Heat curing 3 |
℃ | ||
储存稳定性 storage stability |
min | ASTM D2471 |
备注 |
---|
2、If cured at room temperature |
3、if post cured according to heat curing schedule |
【新闻资讯】查看全部
中美高校石墨烯根底研讨面面观
2016-06-02 纵观全球各国对石墨烯的关注度,若说最热衷的是中国,那么相对淡定些的当属美国了。然而,即便如此,美国高校在石墨烯基础研究创新研发方面也不断传出好消息。那么,美国高校是如何在相对冷静的氛围中,保持基础研究的创新活力呢?带着这些问题,科技日报记者采访了中美几所高校从事石墨烯基础研究的一流专家,希望通过剖析和冷静思考,能够进一步激发和提升国内高校基础研究的巨大创新潜力。 心态:有序理性与快赶猛上 美国对石墨烯研发虽然非常重视,但相比 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |