牌号简介 About |
---|
Body Double是一种持久的铂固化硅橡胶,可直接涂抹在皮肤上,用于制作面部、手部和其他身体部位的模具。橡胶固化迅速,将复制任何原始模型的完美细节-远比任何海藻酸盐更好的细节!一个铸件或多个铸件。…价格大致相同:与仅适用于一次铸造的褐藻酸盐不同,双体几乎适用于任何材料的许多铸件,包括石膏、基质NEO、蜡、树脂(光滑铸造聚氨酯、聚酯等)、低温熔融金属合金等。每个模具使用的双体数量少于大多数褐藻酸盐,因此成本较低。每个模具差不多。BodyDouble无臭,ACMI等级无毒,皮肤安全。在身体上添加超叶酸释放添加剂,双硅树脂会产生一种自我释放的硅树脂,很容易从头发覆盖的身体部位去除。车身双“标准设置”,适用于较大的表面区域。工作时间为5分钟,拆卸时间为30分钟*。身体双“快速设置”快速周转。工作时间为90秒,拆卸时间为5分钟*。*取决于材料温度、环境温度和体温-有关详细信息,请参阅下面的“准备”。 Body Double® is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model - far better detail than any alginate! One Casting or Many . . . For About The Same Price: unlike alginates, which are good for one only casting, Body Double® will last for many castings of almost any material including plaster, Matrix® Neo®, wax, resins (Smooth-Cast urethanes, polyester, etc.), low-temperature melt metal alloys, etc. The amount of Body Double® used per mold is less than most alginates, so the cost per mold is about the same. Body Double® is odorless and is ACMI rated non-toxic and skin safe. Adding HYPER-FOLIC® release additive to Body Double® silicone will create a self-releasing silicone which is easily removed from hair-covered body areas. Body Double® "Standard Set" for larger surface areas. Working time of 5 minutes and a demold time of 30 minutes*. Body Double® "Fast Set" for fast turnaround. Working time of 90 seconds and a demold time of 5 minutes*. *Depending on material temperature, ambient temperature and body temperature - see "Preparation" below for details. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.17 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.856 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
< 0.10 | % | ASTM D2566 |
粘度 viscosity |
Brushable | ASTM D2393 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
25 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
min | ASTM D2471 | |
脱模时间 stripping time |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
【新闻资讯】查看全部
中国最长的环氧乙烷管道在镇海炼化投入使用
2022-08-15 8月9日,镇海炼化公司环氧乙烷产品通过长输管道输送至镇海石化园区用户,标志着现阶段中国最长的双向循环环氧乙烷长输管道正式投入使用。 长输管道全长17.3公里,采用多项自主创 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |