牌号简介 About |
---|
Dryflex® A1 90A301N:热塑性弹性体材料类型:TPS-SEBS硬度:90邵尔A(4mm)工作温度范围:-50--+125°C(无应力材料)颜色:天然,但可提供任何颜色。展示:自由流动的颗粒,在正常条件下储存时,可以在不预先干燥的情况下进行加工。耐候性:优异的耐化学性:良好(不包括有机溶剂、芳香族和植物油)的可回收性:100%可回收材料经过改性,使其与PA具有良好的粘附性。 Dryflex A1 90A301N: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 90 Shore A (4mm) Service Temperature Range: -50 -- +125 °C (unstressed material) Colour: Natural, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable The material is modified to give good adhesion to PA |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.19 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,5.0kg 190℃,5.0kg |
23 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,4.00 mm Shore A, 4.00 mm |
90 | ASTM D2240 | |
拉伸模量 Tensile modulus |
ASTM D638 | ||
100% 正割 100% secant |
6.00 | MPa | ASTM D638 |
300% 正割 300% secant |
9.00 | MPa | ASTM D638 |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength |
kN/m | ASTM D624 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
使用温度 Operating temperature |
|||
Unstressed Material Unstressed Material |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
科莱恩发布《 2020年综合报告》
2021-03-22 搜料网资讯: 2021年3月17日,专注于可持续发展和创新的特种化学品公司科莱恩(Clariant)发布了2020年综合报告。该报告通过审查有形和无形资产,为公司所有利益相关者创造价值的多维 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |