牌号简介 About |
---|
DOWLEX™ 2552E 聚乙烯树脂是专为零部件注塑加工而研制的,具有优异的低温柔软性、抗冲击性能和耐环境应力开裂性能。DOWLEX 2552E 聚乙烯树脂的注塑制品还具有优异的韧性、尺寸稳定性,光泽度高。 备注:当用于接触食品的应用领域时,在未经改性以及加工流程遵循良好制造规范要求时,DOWLEX 2552E 聚乙烯树脂应该符合美国食品和药物管理局法规177.1520以及绝大多数欧洲国家的食品接触法规的要求。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域: 家用器具 盖材 玩具 冬季运动用品 工业用盖封材料 DOWLEX™ 2552E Polyethylene Resin is specifically designed to exhibit excellent low temperature flexibility and impact resistance with outstanding stress crack resistance in injection moulded parts. DOWLEX 2552E Polyethylene Resin injection mouldings also offer excellent toughness, dimensional stability and a high gloss. Note: DOWLEX 2552E Polyethylene Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: Housewares. Lids. Toys. Winter sports articles. Industrial caps and closures. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
0.920 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
25 | g/10min | ISO 1133 |
螺旋流动长度 Spiral flow length 3 , 4 |
109 | cm | 内部方法 |
收缩率 Shrinkage rate |
|||
MD MD |
2.4 | % | ASTM D955 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) 5 |
ASTM D1693 | ||
50 ℃,100%乳化剂,注塑成型 50 ℃, 100% emulsifier, injection molding |
1.20 | hr | ASTM D1693 |
50 ℃,100%乳化剂,模压成型 50 ℃, 100% emulsifier, molded |
hr | ASTM D1693 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
-20℃,注塑成型 -20 ℃, injection molding |
ASTM D256 | ||
-40℃,注塑成型 -40 ℃, injection molding |
kJ/m² | ASTM D256 | |
23℃,注塑成型 23 ℃, injection molding |
ASTM D256 | ||
拉伸冲击强度 Tensile impact strength |
|||
模压成型 Compression Molding |
kJ/m² | ISO 8256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
ASTM D638 | ||
2% 正割,模压成型 2% cut, molded |
MPa | ASTM D638 | |
2% 正割,注塑成型 2% cut, injection molding |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
MPa | ASTM D638 | |
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
断裂,注塑成型 Fracture, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,注塑成型 Fracture, injection molding |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 220°C,3 毫米通道深度,恒定的注射压力,模具温度 15°C。 |
3 模具温度: 59°F, 熔体温度: 428°F |
4 3 毫米通道深度,恒定的注射压力 |
5 缺口 |
【新闻资讯】查看全部
一文带你了解2020年中国生物降解塑料行业市场现状、竞争格局及发展前
2021-03-31 搜料网资讯: 中国可降解塑料渗透节奏有望加快 相较于塑料制品产量已占据全球的1/4,目前我国生物可降解塑料消费量全球占比仅为4.6%,行业尚处于导入期。接近传统塑料两倍的价格 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |