牌号简介 About |
---|
LLC6-500是一种经共聚物认证的底漆,设计用于薄壁高质量应用的高流动注射成型。LLC6-500具有易加工性,适用于各种成型条件,高光泽表面,刚性好,循环时间快,低温韧性和无翘曲成型。建议的加工温度为170至210°C,模具温度为20至40°C。LLC6-500符合FDA法规21CFR 177.1520(c)3.1a和大多数有关使用聚乙烯与食品接触的国际法规。 LLC6-500 is a copolymer certified prime resin designed for High-Flow Injection Molding of thin-walled, high quality applications. LLC6-500 features easy processability over a wide range of molding conditions, high gloss surface, good rigidity, fast cycle times, low temperature toughness and warpage free moldings. Suggested processing temperature is 170 to 210°C, with the mold at 20 to 40°C. LLC6-500 complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.926 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
50 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
50 ℃,F50 50 ℃,F50 |
5.00 | hr | ASTM D1693 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
15.2 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
90 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割 1% secant 3 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 20 in/min |
3 0,051 in/min |
【新闻资讯】查看全部
三星选择帝斯曼的Arnitel ® TPE用于智能手表表带
2018-09-21 荷兰皇家帝斯曼,一个全球性的科学为基础的公司,活跃于健康,营养和材料,称可穿戴电子产品的生产商正在转向它的Arnitel 热塑性弹性体软带。一个专门为应用程序创建的新的高性 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |