牌号简介 About |
---|
DP-11-90是一种未填充、低粘度、快速凝固的双组分聚氨酯系统。一个易于使用的1:1混合比(A部分/B部分),DP-11-90为用户提供了3分钟的工作时间,部件可在30分钟内拆卸。适当固化后,DP-11-90将表现出高冲击强度,并产生热塑性类似零件。一些突出的特点包括:无汞、中等耐热性、1:1混合比、固化后变成棕褐色、模具寿命长、冲击强度高、无不良气味、优良的表面处理性能、热塑性外观、每天更多的零件 DP-11-90 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), DP-11-90 offers the user a 3 minute working time with parts demoldable in as little as 30 minutes. When properly cured, DP-11-90 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: Mercury free Moderate heat resistance 1 to 1 mix ratio Turns tan color upon cure Longer mold life High impact strength No objectionable odor Excellent finishing properties Thermoplastic appearance More parts per day |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.25 | % | ASTM D2566 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
Amber | ||
-- -- 3 |
Opaque | ||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
110 | ||
Part B Part B |
|||
体积混合比(PBV) Volume Mixing Ratio (PBV) |
|||
Part A Part A |
|||
粘度 viscosity |
|||
-- -- 2 |
Pa·s | ||
-- -- 4 |
Pa·s | ||
-- -- 3 |
Pa·s | ||
胶凝时间 Gelation time |
min | ASTM D2471 | |
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
室温固化,24 hr @ 24 hr room temperature cure |
℃ | ||
室温固化,1 hr,150°F Room temperature curing, 1 hour, 150 ° F |
℃ | ||
室温固化,1 hr,200°F Room temperature curing, 1 hour, 200 ° F |
℃ | ||
脱模时间 stripping time |
|||
25℃ 25℃ |
min |
备注 |
---|
2、Part A |
3、Part B |
4、Mixed |
【新闻资讯】查看全部
信易机械手为连接器制造商降本增效
2020-09-04 搜料网资讯:连接器,即CONNECTOR。国内亦称作接插件、插头和插座。连接器是电子工程技术人员经常接触的一种部件。它的作用是在电路内被阻断处或孤立不通的电路之间,架起沟通的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |