公司信息及水印
牌号简介 About |
---|
EPO-TEK® H65-175MP是一种单组分,氧化铝填充环氧树脂军事混合模具和组件连接。也可用于半导体、高温陶瓷和真空包装。 EPO-TEK® H65-175MP is a single component, alumina-filled epoxy for military hybrid die and component attach. It can also be used for semiconductor and high temperature ceramic and vacuum packaging. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
< 20.0 | µm | |
离子类型 Ionic type |
|||
Cl- Cl- |
< 200 | ppm | |
K+ K+ |
< 50 | ppm | |
Na+ Na+ |
< 50 | ppm | |
NH4+ NH4+ |
38 | ppm | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
℃ | TGA | |
Die Shear Strength(>20 kg,23℃) Die Shear Strength(>20 kg,23℃) |
MPa | ||
工作温度 working temperature |
|||
Continuous Continuous |
℃ | ||
Intermittent Intermittent |
℃ | ||
Storage Modulus(23℃) Storage Modulus(23℃) |
GPa | ||
触变指数 Thixotropic index |
|||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
密度 Density |
g/cm³ | ||
粘度 viscosity 5 |
|||
23℃ 23℃ 5 |
Pa·s | ||
固化时间 Curing time |
|||
180℃ 180℃ |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
相对电容率 Relative permittivity |
|||
1 kHz 1 kHz |
|||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
cm/cm/℃ | ||
-- -- 4 |
cm/cm/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
贮藏期限 Storage period |
|||
-40℃ -40℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-300°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 2.5 rpm |
【新闻资讯】查看全部
用3D打印技术制造纹理效果
2016-09-09 美国德州奥斯丁的设计公司Lehrmitt Design Studios最近增开了一条全新的产品线Surface Skins,能为产品设计师和制造商的3D打印产品的表面添加惊人的纹理效果。 Surface Skins技术可生成100多种设计,包括动物表面纹理、纺织品纹理、部族图案和地理设计等。可用于移动电话盖、照明开关板、化妆品盒和眼镜框等。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |