牌号简介 About |
---|
Thermoset Plastics 310是一种环氧; 环氧树脂材料,。 该产品在北美洲有供货,加工方式为:包封或浇铸。 Thermoset Plastics 310的主要特性有: 坚硬 绝缘 良好的韧性 耐热 Thermoset Plastics 310的典型应用领域为:电线电缆 SABIC® LLDPE RG50035 SABIC® LLDPE RG50035 is a Linear Low Density Polyethylene reactor powder grade typically used for various compounding applications, including Wire & Cable extrusion. SABIC® LLDPE RG50035 contains a low level of antioxidants and does not contain any antiblock and/or slip agents. Application Wire & Cable Extrusion: Base resin for Cable compounds and masterbatches. Masterbatch Compounding: Compounding applications, like colour masterbatches. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE RG50035 SABIC® LLDPE RG50035 is a Linear Low Density Polyethylene reactor powder grade designed for various compounding applications. SABIC® LLDPE RG50035 contains low level of antioxidant and does not contain any antiblock and/or slip agents. Application Compounding applications, like colour masterbatches. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.935 | g/cm³ | ISO 1183, ASTM D1505 |
表观密度 Apparent density |
0.42 | g/cm³ | ASTM D1895 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
5.0 | g/10min | ASTM D1238,ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,模压成型 Yield, molding |
14.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
ISO 527-2 | ||
屈服,模压成型 Yield, molding |
15 | % | |
断裂,模压成型 Fracture, molded |
% | ||
弯曲模量 Bending modulus |
|||
23℃,模压成型 23 ℃, molded |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
模压成型 Compression Molding |
kJ/m² | ISO 180-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | 内部方法 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength 1 |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
60 Hz 60 Hz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
ASTM D150 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
最具应用前景的生物降解塑料盘点
2020-11-15 搜料网资讯: 2020年5月18日海南省发布的《全生物降解塑料制品?通用技术要求(DB46/T505-2020)》地方标准中明确了8种主要的生物可降解塑料。 目前最具应用前景的几种生物降解材料:聚 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |