牌号简介 About |
---|
Moplen EP5015 Moplen EP5015是一种中等流动性的有核异相共聚物,适用于注塑应用。Moplen EP5015具有优异的低温冲击性能,结合良好的刚度和良好的加工性能。Moplen EP5015由客户选择,用于行李、运输和冷藏箱、运动和休闲设备、玩具以及在低温下需要高抗冲击性的典型消费品。Moplen EP5015树脂符合21 CFR 177.1520《食品接触联邦法规》中FDA的要求。Moplen EP5015 Moplen EP5015是一种中等流动性的有核异相共聚物,具有最佳的刚度和韧性平衡、低温下的高冲击强度、低翘曲、良好的美白性和优良的加工性能。柔软性。典型的客户应用包括运输和冷藏箱、运动和休闲设备、玩具以及典型的消费品和行李。 Moplen EP5015 Moplen EP5015 is a medium fluidity nucleated heterophasic copolymer suitable for injection molding applications. Moplen EP5015 exhibits an outstanding low temperature impact performance in combination with a good stiffness and an excellent processability. Moplen EP5015 is selected by customers for use in luggage, transport and cold storage crates, sports and leisure equipment, toys and typical consumer goods which require a high impact resistance at low temperatures. Moplen EP5015 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Moplen EP5015 Moplen EP5015 is a medium fluidity nucleated heterophasic copolymer, with optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage, good whitening resistance, and excellent processability. Typical customer applications are transport and cold storage crates, sports and leisure equipment, toys and typical consumer goods and luggages. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
15 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃ -20℃ |
88 | J/m | ASTM D256 |
23℃ 23℃ |
无断裂 | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
85.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
山东鲁北企业集团总公司副总经理翟洪轩:大力推广应用清洁低碳技术
2022-03-13 《政府工作报告》强调要推动能耗双控向碳排放总量和强度双控转变,完善减污降碳激励约束政策。能耗双控对化工行业发展影响较大,如氯碱、炼化、化肥等都被列入了两高项目,国 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |