牌号简介 About |
---|
SABIC® PPcompound 7603B是一种矿物填充改性聚丙烯。这种材料结合了高耐刮性和良好的刚度和冲击。另外,这种材料具有高流动性和低密度。该材料加工窗口宽,性能优良。典型的应用包括汽车内部零件,如仪表板、上下仪表板、门板和装饰件。SABIC® PPcompound 7603B是指定的汽车等级。 SABIC® PPcompound 7603B is a mineral filled modified polypropylene. This material combines high scratch resistance with a good stiffness and impact. Addtionally the material offers a high flow and low density. This material has a broad processing window and good esthical performance. Typical applications include automotive interior parts such as instrument panels, lower and upper dashboard, door panels and trim. SABIC® PPcompound 7603B is a designated automotive grade. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.960 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
15 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
|||
24 hrs 24 hrs |
1.2 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/4A | ||
-20℃,注塑成型 -20 ℃, injection molding |
4.0 | kJ/m² | ISO 180-4A |
0℃,注塑成型 0 ℃, injection molding |
7.0 | kJ/m² | ISO 180-4A |
23℃,注塑成型 23 ℃, injection molding |
kJ/m² | ISO 180-4A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
ASTM D696 | ||
-30 到 30℃ -30 to 30 ℃ |
cm/cm/℃ | ASTM D696 | |
23 到 80℃ 23 to 80 ℃ |
cm/cm/℃ | ASTM D696 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,注塑成型 Shaw's D, injection molding |
ISO 868 | ||
拉伸强度 tensile strength |
ISO 527-2/5/50 | ||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding |
MPa | ISO 527-2/5/50 | |
断裂,3.20 mm,注塑成型 Fracture, 3.20 mm, injection molded |
MPa | ISO 527-2/5/50 | |
拉伸应变 Tensile strain |
|||
断裂,3.20 mm,注塑成型 Fracture, 3.20 mm, injection molded |
% | ISO 527-2/5/50 | |
弯曲模量 Bending modulus 2 |
|||
注塑成型 injection molding 2 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法 I (三点负荷) |
【新闻资讯】查看全部
科思创薄膜材料为可成形电子零碎铺平路途
2016-08-24 智能服装上的只能电子产品 更高效的生产,更高水平的审美,更环保的产品 科思创在2016年K展(塑料行业展)中展出一件发光的衣服。LED灯管使其显得与众不同,而灯光同样也发挥关键作用,比如保护行人和骑行者以避免发生交通事故。这件衣服的独特之处在于:发光二极管并非安装在板材或带材上,而是定位在一块柔软的面料上。 电子系统的研发核心是在无功能损失的前提下,对移动产生感应 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |