牌号简介 About |
---|
EMPILON®HAR系列复合材料专门用于工程塑料(如ABS,PC,尼龙,PETG,PBT等)的过度成型,这些工程塑料常用于3C行业(计算机,通信和消费电子产品)以及手持设备产品具有柔软触感,防滑和振动功能的用途。氢化苯乙烯嵌段共聚物是该HAR系列化合物的主要成分,其硬度范围为Shore A 39~Shore 85.它们可以通过双注射和共挤出机或普通注塑机加工,采用嵌件成型工艺。 EMPILON® HAR series compound are specially designed for over-molding with engineering plastic such as ABS, PC, Nylon, PETG, PBT etc. which are commonly use in the 3C industry (Computer, Communication and Consumer electronics) as well as hand held device products for soft touch, anti-slip & vibration functional purposes. Hydrogenated Styrenic Block Copolymer is the main content of this HAR series compound, its hardness range is from Shore A 39 ~ Shore 85. They can be processed by double injection and co-extrusion machines or ordinary plastic injection machines with an insert molding process. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.26 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
23 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate 1 |
|||
MD MD |
0.20 | % | |
TD TD |
0.20 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
71 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
MPa | ASTM D412 | |
300% 应变 300% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
压缩形变 Compression deformation |
|||
23℃,70 hr 23℃,70 hr |
% | ASTM D395 | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
125℃,168 hr 125℃,168 hr |
% | ASTM D573 | |
空气中极限伸长率的变化率 The rate of change in ultimate elongation in air |
|||
125℃,168 hr 125℃,168 hr |
% | ASTM D573 | |
空气中硬度计硬度的变化率 The rate of change in hardness of a hardness tester in the air |
|||
支撐 A,125℃,168 hr Support A, 125 ℃, 168 hr |
ASTM D573 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Adhesion to PA66 Adhesion to PA66 |
kN/m |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Reference Only |
【新闻资讯】查看全部
加政府打压中企又一例证:中国移动被迫终止加拿大业务
2021-12-30 搜料网资讯: 中国移动加拿大子公司CMLink于28日宣布,应加拿大联邦政府要求,该公司业务将于2022年1月5日起停止运营,当天起用户可申请退款。这被认为是加拿大政府以国家安全为由 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |