牌号简介 About |
---|
Dryflex® PS 70R201B:热塑性弹性体基料:TPS-SEBS硬度:70 IRHD使用温度范围:-50°C至120°C颜色:黑色,但在任何阴影下都可以轻易着色呈现:正常条件下储存时可在不预干燥的情况下处理的自由流动颗粒耐化学性:良好(有机溶剂除外,芳香和植物油)回收:100%可回收的模具收缩率(线性):约0.75-2%,取决于具体形状和浇口的位置特殊特征:符合BS EN 681-2-2000、欧洲标准EN 681-2、WT型、管接头用弹性密封件的要求。 Dryflex PS 70R201B: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 70 IRHD Service Temperature Range: -50°C to 120°C Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: Meets the requirements of BS EN 681-2-2000, the European Standard EN 681-2, Type WT, elastomeric seals for pipe joints |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ISO 2781 |
收缩率 Shrinkage rate 2 |
0.75 to 2.0 | % | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
ISO 37 | ||
TD,屈服 TD, yield |
10.0 | MPa | ISO 37 |
MD,屈服 MD, yield |
5.50 | MPa | ISO 37 |
拉伸应变 Tensile strain |
ISO 37 | ||
断裂 fracture |
830 | % | ISO 37 |
流量,断裂 Flow rate, fracture |
% | ISO 37 | |
压缩形变 Compression deformation 3 |
ISO 815 | ||
-10℃,72 hr -10℃,72 hr |
% | ISO 815 | |
23℃,72 hr 23℃,72 hr |
% | ISO 815 | |
70℃,24 hr 70℃,24 hr |
% | ISO 815 | |
应力松弛 Stress relaxation |
ISO 3384 | ||
100 day(2400 hr):23℃ 100 day(2400 hr):23℃ |
% | ISO 3384 | |
7 day(168 hr):23℃ 7 day(168 hr):23℃ |
% | ISO 3384 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ISO 868 | ||
IRHD 硬度 IRHD hardness |
ISO 48 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
使用温度 Operating temperature |
℃ | ||
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Change in Tensile Stress(70℃,168 hr) Change in Tensile Stress(70℃,168 hr) |
% | ISO 37 | |
Change in Tensile Strain at Break(70℃,168 hr) Change in Tensile Strain at Break(70℃,168 hr) |
% | ISO 37 | |
邵氏硬度的变化率 The rate of change in Shore hardness |
|||
IRHD,70℃,168 hr IRHD,70℃,168 hr |
ISO 48 | ||
Change in Volume(70℃,168 hr,in Water) Change in Volume(70℃,168 hr,in Water) |
% | ISO 1817 | |
Change in Volume(耐臭氧性) Change in Volume (ozone resistance) |
ISO 1431-1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Depending on shape of the detail and placement of gate |
3 类型 B |
【新闻资讯】查看全部
科思创为Stratasys FDM®材料生态系统增加了3D打印长丝
2022-05-19 ● 为最可靠的FDM打印机平台之一验证和优化了性能材料 ● 两家全球企业扩大合作,提供全面的3D打印产品 领先的材料公司科思创正在扩大与打印机制造商Stratasys的合作,为FDM技术的材 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |