牌号简介 About |
---|
TIPPLEN® H 650 F是一种用于生产双轴取向薄膜的均聚聚丙烯,设计用于高速生产。该等级不含任何防滑剂或防阻塞剂。该等级灰含量低。TIPPLEN® H 650 F不含钙硬脂酸盐,特别适用于单层和共挤结构中的金属化。由TIPPLEN® H 650 F制成的BOPP薄膜具有良好的力学性能,即使在低温下也具有较高的抗冲击强度和抗穿刺性能。BOPP薄膜具有良好的防潮、防油、防氧化性能,具有良好的光学性能。包装使用厚度范围为0.01-0.04 mm的单层或共挤薄膜。TIPPLEN® H 650 F适用于食品接触。产品符合食品接触法规。 TIPPLEN H 650 F is a homopolymer polypropylene for the production of biaxially oriented films designed for high speed production. The grade does not contain any slip or antiblocking agents. The grade has low ash content. TIPPLEN H 650 F is Ca-stearate free and it is particularly suitable for metallization both in monolayer and in coextruded structures. BOPP films made from TIPPLEN H 650 F have good mechanical properties, high impact strength and puncture resistance even at low temperatures. The BOPP film forms an excellent barrier against moisture, oils and oxidation and features good optical properties. Monolayer or coextruded films with a thickness range of 0.01 - 0.04 mm are used for packaging. TIPPLEN H 650 F is suitable for food contact. The product complies with Food Contact Regulations. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
3.0 | g/10min | ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
6.0 | kJ/m² | ISO 180-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
105 | ℃ | ISO 75-2/B |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
1600 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
35.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ISO 178 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
德对伊朗塑料橡胶机械出口增长近5倍 制造商看好伊朗
2017-08-01 据《塑料新闻》报道,伊朗机械市场潜力巨大,在2017年的前5个月,德国对伊朗的机械出口金额比去年同期增长了近5倍,达到了达到2100万欧元,约占伊朗市场份额的8.6%。 伊朗塑料和橡胶机械十强供应商 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |