牌号简介 About |
---|
低卤速固化触变性环氧乙烷-TEK 353(前身为108-93-3)的较长使用寿命版本 Low halogen snap curable thixotropic longer pot life version of EPO-TEK® 353ND Formerly 108-93-3 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
< 20.0 | µm | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index 2 |
1.569 | ||
透光率 Transmittance |
|||
940-2060 nm 940-2060 nm |
> 90.0 | % | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
417 | ℃ | |
工作温度 working temperature |
|||
Continuous Continuous |
-55 到 250 | ℃ | |
Intermittent Intermittent |
℃ | ||
触变指数 Thixotropic index |
|||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 3 |
|||
-- -- 4 |
|||
密度 Density |
|||
Part B Part B |
g/cm³ | ||
Part A Part A |
g/cm³ | ||
粘度 viscosity 5 |
|||
23℃ 23℃ 5 |
Pa·s | ||
固化时间 Curing time |
|||
150℃ 150℃ |
hr | ||
储存稳定性 storage stability |
min | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
23℃ 23℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 589 nm |
3 Part B |
4 Part A |
5 1 rpm |
【新闻资讯】查看全部
新的3D打印机的构建室可以转换为干净室
2019-08-14 带有集成温度控制和过滤系统的新型 3D打印机 允许用户在构建室内创建洁净室环境。该打印机由总部位于慕尼黑的创业公司Kumovis开发,可用于生产 高性能塑料(包括PEEK) 的患者专用 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |