牌号简介 About |
---|
Hysol US1151是一种低粘度的可再密封封装化合物。具有优良的低温性能。将这种材料引入8-12目砂床上,既可提高导热系数,又可降低收缩率和成本。Hysol US1151可用于封装各种应用的电子设备,包括发动机罩下的汽车和船舶。玻璃化转变温度低意味着敏感化合物在低温漂移过程中不会受到损坏。 HYSOL® US1151™ is a low viscosity, reenterable potting and encapsulation compound. It has excellent low temperature properties. Introduction of this material on a bed of 8-12 mesh sand increases thermal conductivity while decreasing shrinkage and cost. HYSOL® US1151™ can be used to encapsulate electronics for various applications including under-the-hood automotive and marine. The low glass transition temperature means that sensitive compounds are not damaged during low temperature excursions. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
|||
MD MD |
0.90 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.20 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
30 | ||
邵氏 OO Shaw's OO |
78 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
-40.0 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-70 到 -50℃ -70 to -50 ℃ |
cm/cm/℃ | ||
-20 到 -10℃ -20 to -10 ℃ |
cm/cm/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength |
|||
0.508 mm 0.508 mm |
kV/mm | ||
介电常数 Dielectric constant |
|||
25 ℃,100 Hz 25 ℃,100 Hz |
|||
25 ℃,1 kHz 25 ℃,1 kHz |
|||
25 ℃,100 kHz 25 ℃,100 kHz |
|||
耗散因数 Dissipation factor |
|||
25℃,100 Hz 25℃,100 Hz |
|||
25℃,1 kHz 25℃,1 kHz |
|||
25℃,100 kHz 25℃,100 kHz |
|||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
加热减量 Heating reduction |
|||
168 hr @ 125℃ 168 hr @ 125℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
|||
-- -- 3 |
|||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
|||
Part B Part B |
|||
体积混合比(PBV) Volume Mixing Ratio (PBV) |
|||
Part A Part A |
|||
Part B Part B |
|||
密度 Density |
|||
23℃ 23℃ 2 |
g/cm³ | ||
23℃ 23℃ 4 |
g/cm³ | ||
23℃ 23℃ 3 |
g/cm³ | ||
粘度 viscosity |
|||
布络克菲尔德 RVF Brookfield RVF 3 |
Pa·s | ||
布络克菲尔德 RVF,25℃ Brookfield RVF, 25 ℃ 4 |
Pa·s | ||
布络克菲尔德 RVF Brookfield RVF 2 |
Pa·s | ||
固化时间 Curing time |
|||
23℃ 23℃ |
hr | ||
储存稳定性 storage stability 5 |
|||
23℃ 23℃ 5 |
min |
备注 |
---|
2. Part B |
3. Part A |
4. Mixed |
5. 100 g mass |
【新闻资讯】查看全部
俄罗斯将开始全面使用3D打印制造飞机零部件
2021-12-08 搜料网资讯: 近日,俄罗斯国家技术集团宣布,该集团下属的增材技术中心已获得俄联邦工业和贸易部批准,可进行航空部件和其他零配件的批量化3D打印生产。这意味着俄罗斯航空制 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |