牌号简介 About |
---|
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.21 | ASTM D792 | |
收缩率 Shrinkage rate |
|||
MD MD |
|||
MD MD |
0.5~0.8 | % | |
熔体质量流动速率 Melt Flow Rate |
|||
220℃,10.0kg 220℃,10.0kg |
7.5 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
37 | MPa | ASTM D638 |
拉伸模量 Tensile modulus |
2200 | % | ASTM D638 |
弯曲强度 bending strength |
|||
屈服 yield |
MPa | ASTM D790 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,3.2 mm 1.8 MPa,3.2 mm |
℃ | ASTM D648 | |
0.45 MPa,6.4 mm 0.45 MPa,6.4 mm |
℃ | ASTM D648 | |
相对温度指数 Relative temperature index |
|||
电气性能 Electrical performance |
℃ | UL 746B | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746B | |
非机械冲击性能 Non mechanical impact performance |
℃ | UL 746B | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
-40℃ -40℃ |
J/m | ASTM D256 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60° 60° |
ASTM D523 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.47 mm 1.47 mm |
UL 94 | ||
2.79 mm 2.79 mm |
UL 94 | ||
CSA CSA |
File No | CSA LISTED | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
辐射板火焰蔓延指数 Radiation plate flame spread index |
mm | ASTM E 162 | |
紫外线, 水暴露/浸没 UV rays, water exposure/immersion |
UL 746C | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻 Volumetric resistance |
Ohm-cm | ASTM D 257 | |
介电强度 Dielectric strength |
|||
1.6 mm,在空气中 1.6 mm in air |
kV/mm | ASTM D149 | |
耐电弧性 Arc resistance |
|||
钨丝 Tungsten wire |
PLC Code | ASTM D495 | |
热丝引燃{PLC} |
PLC Code | UL 746A | |
高电压电弧起痕速率 {PLC} High voltage arc marking rate {PLC} |
PLC Code | UL 746A | |
高电流电弧引燃,表面{PLC} High current arc ignition, surface {PLC} |
PLC Code | UL 746A | |
相比漏电起痕指数 Compared to the leakage tracing index |
PLC Code | UL 746A |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
科思创扩大德国TPU薄膜产能,满足全球需求
2022-05-19 近日,科思创宣布正在扩大其Platilon系列热塑性聚氨酯(TPU)薄膜的生产能力,并扩建相关的基础设施和物流设施。为此,科思创正在为其位于德国下萨克森州博姆利茨的TPU薄膜德国中心投 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |