牌号简介 About |
---|
Technyl One J 60x1 V30 Gray 2689是一种基于非卤化阻燃系统的高温聚酰胺,用30%的玻璃纤维增强,具有一流的防火性能,热稳定,用于注塑成型。一张完整的黄色卡片具有0.4 mm的UL94 V0额定值、不匹配的热老化性能(150°C电气RTI-相对热指数)和出色的电气性能,包括较高的比较跟踪指数(600伏及以上的CTI 0)。与传统的高性能塑料相比,该产品具有优越的电气性能。低腐蚀性确保了加工工具的使用寿命。该产品基于高流动性矩阵,在生产率和设计自由度方面具有很强的优势。 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.44 | g/cm³ | |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.55 | % | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.3 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
11000 | MPa | |
拉伸应力(断裂,23°C) Tensile stress (fracture, 23 ° C) |
130 | MPa | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ||
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ||
弯曲应力(23°C) Bending stress (23 ° C) |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ||
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
熔融温度 Melting temperature |
℃ | ||
RTI Elec(0.40 mm) RTI Elec(0.40 mm) |
°C | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength |
|||
0.8 mm 0.8 mm |
kV/mm | ||
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
0.40 mm 0.40 mm |
|||
0.80 mm 0.80 mm |
|||
1.60 mm 1.60 mm |
|||
3.20 mm 3.20 mm |
|||
灼热丝可燃性指数 Glowing wire flammability index |
|||
0.80 mm 0.80 mm |
℃ | ||
1.6 mm 1.6 mm |
℃ | ||
3.2 mm 3.2 mm |
℃ | ||
热灯丝点火温度 Hot filament ignition temperature |
|||
0.8 mm 0.8 mm |
°C | ||
1.6 mm 1.6 mm |
°C | ||
极限氧指数 Extreme oxygen index |
% | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
欧洲铁路认证 European Railway Certification |
|||
R22 R22 |
|||
R23 R23 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
精业机器三工位注拉吹机WISBIII--40新款奶瓶机
2018-08-22 PPSU塑料除了具有塑料共有的轻盈透明的特征外,还具有耐高温、化学性质稳定、不含有毒物质双酚A等特性。正是因为PPSU材料所独有的特性,对PPSU奶瓶机以及模具有了更高的要求。仅就耐高温这一项来说,PPSU奶瓶机的主要部件比普通机型需要耐更高温度,这给生产工艺带来了较大的难度。 (图为精业机器三工位注拉吹机WISBIII--40新款奶瓶机) 柳州市精业机器有限公司(以 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |