牌号简介 About |
---|
拜内尔4100系列树脂是一种酸酐改性线性低密度聚乙烯(LLDPE)树脂。所有拜内尔4100系列树脂都是颗粒状的,可用于传统的挤出和共挤设备,用于加工聚乙烯树脂。拜内尔4100系列树脂可与各种材料粘合。它们最常用于粘附在EVOH、聚酰胺、PE和乙烯共聚物上。拜内尔41E865也因其在共挤过程中能粘附在聚苯乙烯(PS)上而闻名。4100系列树脂可用于共挤工艺,包括:吹塑薄膜/片材吹塑熔体和固相热成型片材和管材LLDPE树脂以其耐温性和韧性而闻名。这些物理性能使4100系列树脂在以下应用中工作良好:袋装沸腾结构吹塑容器,其中跌落强度是重要的袋装盒膜,其中LLDPE是热密封层。 BYNEL® Series 4100 series resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All BYNEL Series 4100 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins. BYNEL 4100 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers. BYNEL 41E865 is also known for its ability to adhere to PS (polystyrene) in the coextrusion process. Series 4100 resins can be used in coextrusion processes including: blown film cast film/sheet blow molding melt and solid phase thermoforming sheet and tubing LLDPE resins are known for their temperature resistance and toughness. These physical properties make the 4100 series resins work well in applications such as: boil-in-bag structures blow molded containers in which drop strength is important bag-in-box films film where LLDPE is the heat seal layer. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.940 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
4.7 | g/10min | ASTM D1238 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
|
82 | ℃ | ASTM D1525 |
峰熔化温度 Peak melting temperature |
109 | ℃ | ASTM D3418 |
凝固点 freezing point |
106 | ℃ | ASTM D3418 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
SABIC将扩大含有PCR的工程塑料产品组合
2020-11-26 搜料网资讯: 为响应消费电子业务和电子电气(EE)行业主要品牌对更多可持续发展材料的需求,化工行业的全球领导者SABIC宣布其工程热塑性塑料业务正在扩大含有大量消费后回收材料 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |