牌号简介 About |
---|
双组分触变室温固化环氧胶粘剂。它是一种电绝缘和热绝缘环氧树脂,设计用于半导体包装、电子、医疗和光学工业的一般应用。更高粘度的EPO-TEK 730。 A two component, thixotropic, room temperature-curing epoxy adhesive. It is an electrically and thermally insulating epoxy designed for general applications in semiconductor packaging, electronics, medical, and optical industries. A higher viscosity version of EPO-TEK® 730. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颗粒大小 Particle size |
< 20.0 | µm | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
417 | ℃ | |
Die Shear Strength(>10 kg,23℃) Die Shear Strength(>10 kg,23℃) |
23.4 | MPa | |
工作温度 working temperature |
|||
Continuous Continuous |
℃ | ||
Intermittent Intermittent |
℃ | ||
Storage Modulus(23℃) Storage Modulus(23℃) |
GPa | ||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 5 |
|||
密度 Density |
|||
Part B Part B |
g/cm³ | ||
Part A Part A |
g/cm³ | ||
粘度 viscosity 7 |
|||
23℃ 23℃ 7 |
Pa·s | ||
固化时间 Curing time |
|||
80℃ 80℃ |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
相对电容率 Relative permittivity |
|||
1 kHz 1 kHz |
|||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
7.4E-5 | cm/cm/℃ | |
-- -- 4 |
1.7E-4 | cm/cm/℃ | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
23℃ 23℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 Part B |
6 Part A |
7 1.0 rpm |
【新闻资讯】查看全部
SKC在中国投资7000万美元增建湿化学品、聚氨酯工厂
2017-10-31 韩国化工企业SK集团旗下的SKC公司将投资800亿韩元(约合7100万美元),在中国工业基地增设设备,生产无尘组件和机动车辆所需的聚氨酯化学品。 随着公司在江苏南通的设备增建,公司目标在2021年营业收入达到1300亿韩元,南通制造商的营业利润在2021年提高到300亿韩元。 据周四公司透露,SKC董事会于星期三批准了一项计划,成立合资公司,暂命名为香港SPC,韩国湿化学品生产商在中国建立湿化工厂。 SKC将投资4000万美元建立湿化学工厂,包括1.11%的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |