牌号简介 About |
---|
INDOTHENE HD 52GB010级是采用M/S.BASELL的工艺诀窍,采用搅拌槽重稀释剂(STHD)工艺生产的高密度聚乙烯(HDPE)吹塑级。具有良好的模胀性、焊缝强度、冲击强度和较宽的分子量分布,易于加工。52GB010可以很容易地在大多数的高密度聚乙烯吹塑生产线上加工。食品接触应用:该等级符合印度标准IS-10146-1982“与食品、药品和饮用水接触时安全使用的聚乙烯”的要求。它还符合IS:10141:1982中批准的成分积极列表。等级符合FDA法规:CFR标题21,177.1520,烯烃聚合物 Indothene-HD grade 52GB010 is a High Density Polyethylene (HDPE) blow moulding grade produced by Stirred Tank Heavy Diluent (STHD) process adopting process know-how of M/s. Basell. It possesses good die swell, weld line strength, impact strength & broad molecular weight distribution for easy processability. 52GB010 can readily be processed on most of the HDPE blow moulding lines. FOOD CONTACT APPLICATIONS : This grade meets the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It also conforms to the positive list of constituents as approved in IS:10141:1982. The grade complies with FDA regulation : CFR title 21 , 177.1520, Olefin polymer |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.952 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 | ||
190℃,21.6kg 190℃,21.6kg |
20 | g/10min | ASTM D1238 |
190℃,5.0kg 190℃,5.0kg |
1.2 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
31.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
11 | % | ASTM D638 |
弯曲模量 Bending modulus 2 |
|||
3.20 mm,注塑成型 3.20 mm, injection molded 2 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm,注塑成型 3.2mm, injection molded |
ASTM D256 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1 |
【新闻资讯】查看全部
我国机器人产业三大隐忧-泡沫 限制 低端
2021-04-16 搜料网资讯: 作为《中国制造2025》的重点发展领域之一,机器人是制造业实现数字化、智能化的关键支撑设备,发展潜力巨大。今年4月,国家工信部、发改委、财政部联合印发了《机 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |