牌号简介 About |
---|
EPO-TEK® 330是一种双组分高温级电绝缘和热绝缘环氧树脂,用于半导体、电子、光纤和医疗应用。 EPO-TEK® 330 is a two component, high-temperature grade, electrically and thermally insulating epoxy for semiconductor, electronics, fiber optics and medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index 5 |
1.535 | ||
透光率 Transmittance |
|||
500 nm 500 nm |
> 51.0 | % | |
600 nm 600 nm |
> 88.0 | % | |
700-1600 nm 700-1600 nm |
% | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Degradation Temperature Degradation Temperature |
℃ | TGA | |
Die Shear Strength(>10 kg,23℃) Die Shear Strength(>10 kg,23℃) |
MPa | ||
工作温度 working temperature |
|||
Continuous Continuous |
℃ | ||
Intermittent Intermittent |
℃ | ||
Storage Modulus(23℃) Storage Modulus(23℃) |
GPa | ||
加热减量 Heating reduction |
|||
200℃ 200℃ |
% | ||
250℃ 250℃ |
% | ||
300℃ 300℃ |
% | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 6 |
|||
-- -- 7 |
|||
密度 Density |
|||
Part B Part B |
g/cm³ | ||
Part A Part A |
g/cm³ | ||
粘度 viscosity 8 |
|||
23℃ 23℃ 8 |
Pa·s | ||
固化时间 Curing time |
|||
150℃ 150℃ |
hr | ||
储存稳定性 storage stability |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
搭接剪切强度 lap shear strength |
|||
23℃ 23℃ |
MPa | ||
相对电容率 Relative permittivity |
|||
1 kHz 1 kHz |
|||
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
3.9E-5 | cm/cm/℃ | |
-- -- 4 |
1.8E-4 | cm/cm/℃ | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
|||
23℃ 23℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
3 Below Tg |
4 Above Tg |
5 589 nm |
6 Part B |
7 Part A |
8 100 rpm |
【新闻资讯】查看全部
Universal Asset Management回收商用飞机的碳纤维
2018-04-27 通用资产管理公司(UAM)已经完全回收商用飞机的碳纤维。可持续发展的这一步使UAM成为全面回收飞机的全球专家。 为了说明这一成就,UAM在为期三天的MRO美洲会议上展示了由商用飞机的碳纤维增强聚合物(CFRP)制造的3D打印引擎支架。所得到的第二代碳纤维材料适合作为工业用原材料。因此,它成为高级增材制造供应链的可行供应,汽车和其他制造行业需要使用具有成本竞争力的碳纤维。 在构成飞机的所有结构元件中,碳纤维是最难回收的。过去十五(15)年的努力并没有产生一个可 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |