牌号简介 About |
---|
BDT40CP是一种中等粘度的固化型含氟弹性体三元共聚物。该等级非常适合于加工性能好且耐流体性能优于共聚物的应用。BDT40CP可以复合以满足主要的氟橡胶规格。BDT40CP可用于O型圈和垫片的压塑成型。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDT40CP is a medium viscosity curative incorporated fluoroelastomer terpolymer. This grade is well suited for application where good processing properties and superior fluid resistance than copolymers are required. BDT40CP can be compounded to meet the major fluoroelastomer specifications. BDT40CP can be used for compression molding of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.86 | g/cm³ | |
门尼粘度 Mooney viscosity |
|||
ML 1+10,121℃ ML 1+10,121℃ |
40 | MU | |
氟含量 Fluorine content |
68 | % | |
可溶性 solubility |
LMW Ketones and esters | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 2 |
|||
邵氏 A Shaw's A 2 |
79 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D412 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D412 | |
压缩形变 Compression deformation |
|||
200℃,70 hr 200℃,70 hr |
% | ASTM D395B | |
MH(177℃) MH(177℃) 3 |
N·m | ||
ML(177℃) ML(177℃) 3 |
N·m | ||
t'90(177℃) t'90(177℃) 3 |
min | ||
ts2(177℃) ts2(177℃) 3 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
【新闻资讯】查看全部
LG化学将建立自身的环境安全“全球标准”,并将其扩展到全球营业场所
2020-09-14 搜料网资讯: 若不安全 就不启动 LG化学,向全球扩展环境安全国际标准 ■ 针对全球营业场所,以到2021年完成重大环境安全事故清零行动为目标 正式启动由公司内部专家与外部专业机 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |