牌号简介 About |
---|
用于医疗行业设备和组件制造的液态硅橡胶材料。应用道康宁QP1-2XX液体硅橡胶(LSRS)是铂催化,热固化材料,设计用于制造医疗设备和设备部件,并用于短期应用。说明:道康宁QP1-2xx LSRS是一系列两部分铂催化硅橡胶,专门设计用于液体注射成型。每种弹性体都是由两部分组成的套件(A部分和B部分)提供的,在使用前必须将等量(按重量)的弹性体充分混合在一起。弹性体通过加成固化(铂催化)反应进行热固化。如图所示混合和固化后,合成的弹性体由交联二甲基和甲基乙烯基硅氧烷共聚物和增强二氧化硅组成。道康宁QP1-2xx LSR的标称硬度范围为30至70,硬度计肖氏硬度A。弹性体可在不进行任何后固化的情况下使用;但如有必要,可用于稳定最终性能。此外,固化弹性体的热稳定性高达204°C(400°F),可高压灭菌,并显示高气体。与大多数热塑性弹性体和热塑性塑料相比的渗透性。 Liquid Silicone Rubber materials for device and component fabrication in the healthcare industry. APPLICATIONS Dow Corning® QP1-2XX Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components and for short term applications. DESCRIPTION Dow Corning QP1-2XX LSRs are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is thermally cured via an addition-cure (platinum-catalyzed) reaction. When blended and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. The Dow Corning QP1-2XX LSRs are available in a range of nominal hardness from 30 to 70, Durometer-Shore A. The elastomers can be used without any post cure; although, if necessary, this may be employed to stabilize the final properties.Furthermore, the cured elastomers are heat stable up to 204°C (400°F), can be autoclaved, and exhibit high gas permeability compared with most thermoset elastomers and thermoplastics. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ASTM D792 |
粘度 viscosity 2 |
|||
Part A Part A |
184 | Pa·s | |
Part B Part B |
165 | Pa·s | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
30 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
3.80 | MPa | ASTM D412 |
100% 应变 100% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 3 |
kN/m | ASTM D624 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 10/s |
3 B 模具 |
【新闻资讯】查看全部
塑料期货暴涨 市场气氛转暖激起投资热情
2016-01-20 19日,大连商品交易所塑料期货主力1605合约延续昨日上涨势头,午盘收于8175元/吨,盘中最高触及8195元/吨,涨幅超过3%,成为今日各商品期货主力合约涨幅最大的商品。该合约昨日也是量价齐升,盘中触及两周高位8045元,尾盘收于8035点,涨幅达3.15%。 化工品期货集中走高,市场氛围转暖激发了市场投资热情,而且近日乙烯现货价格坚挺,因为塑料期货价格脱离现货市场而全线走高。生意社LLDPE分析师薛金磊认为,近日塑料期货的拉升主要是因为期货超跌反弹,弥补现期价差。他指出 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |