牌号简介 About |
---|
Cosmic FARBOSET® 2460是一种矿物填充环氧模塑料,具有固化速度快、可塑性好、抗热震性和防潮性优异。这种化合物是专门为提高抗湿性和高玻璃化转变温度而配制的,以获得最佳的可靠性性能。它设计用于封装各种设备,包括钽和陶瓷电容器、电阻、电阻网络和高性能线圈。 Cosmic FARBOSET 2460 is a mineral-filled epoxy molding compound featuring fast cure rates, excellent moldability and superior thermal shock and moisture resistance. This compound was especially formulated for improved resistance to moisture ingress along with a high glass transition temperature for optimum reliability performance. It is designed to encapsulate a wide range of devices including tantalum and ceramic capacitors, resistors, resistor networks and high performance coils. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- |
1.88 | g/cm³ | |
-- -- 2 |
2.14 | g/cm³ | |
表观密度 Apparent density 3 |
1.00 | g/cm³ | |
螺旋流动长度 Spiral flow length |
79.0 | cm | |
收缩率 Shrinkage rate |
|||
MD MD |
0.40 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
MPa | ||
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ||
介电强度 Dielectric strength |
|||
3.18 mm 3.18 mm |
kV/mm | ||
介电常数 Dielectric constant |
|||
60 Hz 60 Hz |
|||
10 kHz 10 kHz |
|||
1 MHz 1 MHz |
|||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
|||
10 kHz 10 kHz |
|||
1 MHz 1 MHz |
|||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
6.4 mm,Tested by Cosmic Plastics 6.4 mm,Tested by Cosmic Plastics |
UL 94 | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
150℃ 150℃ 6 |
hr | ||
150℃ 150℃ |
hr | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion 4 |
|||
MD MD 4 |
1/℃ | ||
贮藏期限 Storage period 5 |
|||
4℃ 4℃ |
wk | ||
25℃ 25℃ |
wk | ||
35℃ 35℃ |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Molded |
3 Powder |
4 Alpha 1 |
5 Defined as not more than 40% loss of spiral flow based on original values. |
6 Hot Plate Cure Time |
【新闻资讯】查看全部
福建联合石化:“双创新”为芳烃装置节能降耗插上翅膀
2022-05-11 近日,福建联合石化芳烃联合装置以大修改造为契机,采用新技术、新工艺、新设备,建投两个节能改造项目,不仅在中国石化系统内开辟了先河,也为装置节能降耗插上腾飞的翅膀。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |