牌号简介 About |
---|
73005 TU是采用滚圆技术生产的一种旋转成型级LLDPE,具有受控的形貌、良好的加工性、机械性能和紫外线稳定性平衡。73005TU充分稳定与光稳定+给予长期使用寿命在室外暴露。73005时间单位是理想的坦克和容器具有良好的紫外线稳定性的家庭和工业水储存,卫生和农业。 73005 TU is a Rotomolding grade LLDPE produced by the Spherilene Technology with controlled morphology, excellent balance of Processability, Mechanical Properties and UV Stability. 73005TU is stabilized adequately with Light Stabilser + to give a long service life under outdoor exposure. 73005 TU is ideally suited for Tanks and Containers with good UV stability for domestic and industrial water storage, sanitation and agriculture. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
0.934 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
5.0 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 3 |
|||
屈服,注塑成型 Yield, injection molding 3 |
17.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 3 |
|||
断裂,注塑成型 Fracture, injection molding 3 |
> 500 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
500 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 4 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Oven Temperature Oven Temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 23°C |
3 2.0 in/min |
4 压 力1 (10N) |
【新闻资讯】查看全部
我国科学家突破二氧化碳电解制纯甲酸技术
2021-12-18 搜料网资讯: 中国科学技术大学12月16日发布消息,近日,中国科大曾杰教授、电子科技大学夏川教授和中科院大连化学物理研究所肖建平研究员通过铅、铋、铟单原子修饰改变铜基催化 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |