牌号简介 About |
---|
聚合物混凝土用聚酯树脂American-0293H是一种正交型不饱和聚酯树脂,设计用于制造聚合物混凝土,具有优异的机械强度和固化性能。具有高反应性、良好的填充料、低的树脂含量、高性价比、优异的机械性能、短的胶凝时间、快速的后固化应用,适用于制备聚合物混凝土管、板、罐、槽、地板、装饰等。 Polyester Resin For Polymer Concrete MERICAN-0293H is an ORTHO type unsaturated polyester resin designed to make polymer concrete, offering excellent mechanical strength and curing properties. PROPERTY High reactivity Good wet-out with fillers, low resin content, highly cost-effective Excellent mechanical properties Short gel time, fast post-curing APPLICATION Specially for making polymer concrete pipe, panel, tank, slot, flooring, decoration, etc |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
酸值 acid value |
20.00 到 28.00 | mg KOH/g | |
固体含量 Solid content |
57 到 63 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
3500 | MPa | ASTM D638 |
拉伸强度 tensile strength |
72.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
3.0 | % | ASTM D638 |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ||
胶凝时间 Gelation time |
|||
25 到 35℃ 25 to 35 ℃ |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
> 25℃ > 25℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
澳大利亚两大超市宣布逐渐淘汰一次性塑料袋
2017-07-17 澳大利亚两大超市Woolworths和Coles14日先后宣布,将在未来12个月内逐步淘汰一次性塑料袋。 据当地媒体报道,Woolworths集团首席执行官班杜西14日在悉尼宣布了这一决定,称这是正确的环 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |